Wet Rod Mill

wet rod mill

1)Product advantages
1.Iron rods can move inside mill with regularity
2.Easy installation and maintenance
3.Quick discharging
4.Uniform ore particles.
5.Low incidence of overly grinding

2)Product feature
1 The curvature of end cover of wet rod mill is relatively small, which renders iron rods move inside mill with regularity.
2 The diameter of discharge hollow shaft is comparatively bigger, which makes overhaul easier and diminishes the liquid level of ore pulp. Consequently, discharge becomes faster.
3 Uniform ore particles. Less incidence of overly grinding

3)Product application
Wet rod mill is mainly used for coarse grinding. It is configured for fine and coarse grinding in the first stage open-circuit grinding, especially suitable for brittle ore materials

4)Product principle
The main component of wet rod mill is a cylinder with bigger diameter and smaller length which is revolved by transmitting machinery. Materials are put in cylinder through the feed opening and then thoroughly grinded. The falling course of iron balls and ores can produce huge falling impact and autogenous grinding. The continuous feeding of ores can create considerable pressure to make ores move from feed opening toward discharge opening. Finally, acceptable particles are discharged from the discharge opening. Acceptable ore particles are carried away by water by wet mill, or by air by dry mill.