Yokogawa Models ALR111 ALR121 ALE111 Subsystem Communication Module

Yokogawa Models ALR111  ALR121  ALE111 Subsystem Communication Module (for FIO)

GENERAL

This GS is hardware specifications of the Subsystem Communication Module (for FIO) that can be installed in the ESB Bus Node Unit (ANB10S  ANB10D)  the ER Bus Node Unit (ANR10S ANR10D) (*1) and the Compact Field Control Unit (for FIO) (AFF50S AFF50D AFV10S AFV10D) (*2).

*1: Requirements for installation of communication modules in the ER Bus Node Unit. Communication modules can be installed in the ER Bus Node Unit when the firmware revision of EB401 is R3 or later and any one of the following is met.

• When the FCS model name is AFG30  AFG40 AFG81 AFG82 AFG83 or AFG84 and the software revision is R3.03 or later.

• When the FCS model name is AFF50 and the software revision is R3.04 or later.

• When the FCS model name is AFV10 and the software revision is R3.05 or later.

*2: AFF50S and AFF50D are supported by R3.04 or later  and AFV10S and AFV10D are supported by R3.05 or later.

 STANDARD SPECIFICATIONS

 Serial Communication Module

This Module exchanges data with a subsystem such as a programmable controller via a serial communication line using the Subsystem Communication Package. It can be installed in the ESB Bus Node Unit the ER Bus Node Unit and the Compact Field Control Unit (for FIO).

 Ethernet Communication Module

This Module exchanges data with a subsystem such as PLC via an Ethernet communication line using the Subsystem Communication Package. It can be installed in the ESB Bus Node Unit  the ER Bus Node Unit and the Compact Field Control Unit (for FIO).

 Limitations of Installing the ALR111  ALR121  ALE111  ALP111  and ALF111 per FCU

Number of ALR111s  ALR121s  ALP111s  ALE111s per FCS:

Standard Field Control Station: Max.6 (*6) (3 pairs for a dual-redundant configuration)/FCS (*1)Enhanced Field Control Station: Max.16 (8 pairs for a dual-redundant configuration)/FCS (*2) Control Function for Compact Field Control Unit (for FIO):Max.8 (4 pairs for a dual-redundant configuration)/FCS (*3)

Control Function for Basic Field Control Unit (for FIO  for Vnet/IP):16 max. (*5) (8 pairs for a dual-redundant configuration)/FCS (*4)

*1: AFS30  AFS40

*2: AFG30  AFG40  AFG81  AFG82  AFG83  AFG84

*3: AFF50

*4: AFV10

*5: When not using Application Capacity Expansion Package  the maximum total number is 8/FCS. For details  refer to

“Control Function for Basic Field Control Unit (for FIO  for Vnet/IP)” (GS 33P03K10-31E).

*6: ALP111 cannot be installed in Standard Field Control Station.

Number of ALR111s  ALR121s  ALP111s  ALE111s  ALF111 per ER bus train(*7): Max.8 per ER bus train

*7: The communication module (ALR111  ALR121  ALE111 and ALP111) can be installed to remote node only when the main memory of the FCS is 32 MB.

ALF111 ALF111-S00 ALF111-S01 ALF111-S00/F9S00 ALF111-S01/F9S00

ALP111 ALP111-S00 ALP111-S01

ALR111 ALR111-S00 ALR111-S01

ALR121 ALR121-S00 ALR121-S01

ALE111 ALE111-S00 ALE111-S01