Contact Platform Support
Help CenterAC110V/220V 60 Units Charger Rack for KL5LM Range Li-ion Battery Cap Lamp
Related Products
-
AC110V/220V 104 Units Charger Rack for KL5LM Range Li-ion Battery Cap LampNegotiableMOQ: 1 Set -
48 Units Charging Rack for L4.5LM , KL3LM, KL3LM-B Cordless Digital Mining Cap LampNegotiableMOQ: 1 Box
-
AC110V or AC220V 48 Units Charging Rack for KL4.5LM Cordless Digital Mining Cap LampNegotiableMOQ: 1 Piece
-
AC110V or AC230V 96 Units Charger Rack for KL4.5LM Cordless Digital Mining Cap LampNegotiableMOQ: 1 Piece
-
Custom KL5LM DC4.2V Safty Mining Cap Lamp for Mine IndustryNegotiableMOQ: 1 Piece
Certification:ATEX, CE, FCC
AC110V/220V 60 Units Charger Rack for KL5LM Range Li-ion Battery Cap Lamp
KCLA-60 is special used for KL5LM or KL5LM(B) Li-ion battery cap lamp, and it can charges 60pcs cap lamps
at same time. with red/green charging indicator for each charging port. Input voltage is AC110/220V,
output voltage is DC4.2V. Product dimension: 1.10*1.8*0.36m, unit weight 80kg.
Packing dimension: 126*1.85*0.5m, gross weight 100kg.
Applications:
For KL5LM range
Specifications:
|
Model No. |
KCLA-60 |
|
AC input volt |
AC110V or 220v |
|
AC current |
AC 5A |
|
Module input |
DC 6.5-12.V |
|
Module output |
DC 4.2±0.05V |
|
Module output current |
DC 1 ±0.05V |
|
Output ripple |
50MVP-P |
|
Module input under-voltage protection |
6.5V |
|
Module input over-voltage protection |
12.6V |
|
Charging lights |
60 pcs |
Competitive Advantage:
1.each charging contact has a charging module with such function as data sampling.intellingent IC idenification voltage nversion and short-circuit potection.It can control the charging of miner lamps comprehensively
2.The product works properly at a voltage of ac 150-260v.380v.it is characterized by stable performance and strong anti-interference and shock resistance. With dual LED mains and charging output indication.it has such advantages as short charging time and high charging efficiency.In the course of charging. The heat produced is little and energy loss is low.thus prolonging the service life of miner lamps effictively.
3.each charging contact has a built-in high-precision sampling circuit with the function of short-circuit.over-temperature and over-voltage protection.The circuit makes real-time abnormality Judgment for each miner lamp during charging.
4.Charging can be conducted only after cell voltage and protection circuit are found normal by chargind contacts when the lamp holders are fastened to connect the loop.
5.The automatic conversion of constant current and constant voltage can be realized whten each miner lamp is charged through automatic data sampling.in the way.each miner lamp can realize the best charging effect.
6.No converse leakage current and voltage. It is not required to disconnect the positive and negative electrodes of lamp holders in case of the power failure of equipement.
7.with the feature of full-automatic operation.it is simple to use.special operator is not required so that maintenance expenses can be saved.
8.our company may produce the charging equipment of various specifictions and parameters according to clients.(such as 24type, 36type.54type.60type.104type. and go on)
Send Inquiry to This Supplier
You May Also Like
-
Communication CableNegotiableMOQ: 2300 Meters
-
High Quality Single Mode Fiber Optic Patch Cord Jumper CableNegotiableMOQ: 1
-
High Qualiy Black /Red Test Lead Set for MultimeterUS$ 0.2 - 0.9MOQ: 500 Pieces
-
Solid Copper FTP Cat5e LAN Cable/Network CableUS$ 1 - 20MOQ: 10 Boxes
-
Stock Amp Cat6 Patch Cord Amp Cat 6 Patch CordUS$ 0.01 - 10MOQ: 500 Pieces
-
N Female to Right Angle Mmcx Pigtail Coaxial Cable With 179 Cable 8cmUS$ 0.67 - 1.27MOQ: 100 Pieces
-
Fiber Optical Patch Cord SC-FCNegotiableMOQ: 1 Piece
-
Roto Mold Magazine HolderNegotiableMOQ: 1 Set
-
Mineral Insulated Thermocouple CableUS$ 2 - 10MOQ: 10 Pieces
-
Bare Copper Cat6 Unshielded Patch CableUS$ 0.5 - 2.5MOQ: 10 Pieces
