Contact Platform Support
Help Center1310nm 1000BASE-LX / LH Long Haul Singlemode / Multimode GBIC Transceiver Module
Related Products
-
1.25G Tx1550nm - Rx1310nm 20km Bi-Directional GBIC Transceiver Module For Router InterfaceNegotiableMOQ: 1 Piece -
Simplex SC Optical Interface 1.25G Tx1310nm - Rx1550nm 20km Bi-Directional GBIC ModuleNegotiableMOQ: 1 Piece
-
1.25Gbps / 1.0625Gbps TR x 1310nm FP Laser PIN Photodetector 20km GBIC Transceiver ModuleNegotiableMOQ: 1 Piece
-
Duplex SC Interface TR x 850nm 550m 1.25G Fiber Optical GBIC Transceiver ModulesNegotiableMOQ: 1 Kilogram
-
Duplex SC Optical Interface 1.25G TR x 1550nm 80km GBIC Transceiver ModuleNegotiableMOQ: 1 Meter
Certification:FCC, CE, RoHS
1310nm 1000BASE-LX / LH Long Haul Singlemode / Multimode GBIC Transceiver Module
WS-G5486
Features
l Dual data-rate of 1.25Gbps/1.0625Gbps operation
l 1310nm FP laser and PIN photodetector for 10km transmission
l Duplex SC optical interface
l Standard serial ID information compatible with SFF-8053
l +3.3V/5Vsingle power supply
l RoHS Compliant
l Operating case temperature: 0 to +70℃
Applications
l Switch to Switch interface
l Switched backplane applications
l Router/Server interface
l Other optical transmission systems
Description
The GBIC transceiver is high performance, cost effective module supporting dual data-rate of 1.25Gbps/1.0625Gbps and from 10km transmission distance with SMF.
The transceiver consists of two sections: The transmitter section incorporates a FP laser. And the receiver section consists of a PIN photodiode integrated with a trans-impedance preamplifier (TIA). All odules satisfy class I laser safety requirements.
The optical output can be disabled by a TTL logic high-level input of Tx Disable. Tx Fault is provided to indicate degradation of the laser. Loss of signal (LOS) output is provided to indicate the loss of an input optical signal of receiver.
The standard serial ID information Compatible with GBIC MSA describes the transceiver’s capabilities, standard interfaces, manufacturer and other information. The host equipment can access this information via the two-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053
Specification:
Optical and Electrical Characteristics (Operating case temperature TC=25℃, VCC=3.3V)
|
Parameter |
Symbol |
Min. |
Typical |
Max. |
Unit |
Notes |
|
Transmitter |
||||||
|
Centre Wavelength |
λC |
1260 |
1310 |
1360 |
nm |
|
|
Spectral Width (RMS) |
σ |
4 |
nm |
|||
|
Average Output Power |
P0ut |
-9 |
-3 |
dBm |
1 |
|
|
Extinction Ratio |
ER |
9 |
dB |
|||
|
Output Optical Eye |
IEEE 802.3z and ANSI Fibre Channel compatible |
2 |
||||
|
Data Input Swing Differential |
VIN |
300 |
1860 |
mV |
3 |
|
|
Input Differential Impedance |
ZIN |
90 |
100 |
110 |
Ω |
|
|
TX Disable |
Send Inquiry to This Supplier
You May Also Like
-
Communication CableNegotiableMOQ: 2300 Meters
-
High Quality Single Mode Fiber Optic Patch Cord Jumper CableNegotiableMOQ: 1
-
High Qualiy Black /Red Test Lead Set for MultimeterUS$ 0.2 - 0.9MOQ: 500 Pieces
-
Solid Copper FTP Cat5e LAN Cable/Network CableUS$ 1 - 20MOQ: 10 Boxes
-
N Female to Right Angle Mmcx Pigtail Coaxial Cable With 179 Cable 8cmUS$ 0.67 - 1.27MOQ: 100 Pieces
-
Fiber Optical Patch Cord SC-FCNegotiableMOQ: 1 Piece
-
Roto Mold Magazine HolderNegotiableMOQ: 1 Set
-
Mineral Insulated Thermocouple CableUS$ 2 - 10MOQ: 10 Pieces
-
Bare Copper Cat6 Unshielded Patch CableUS$ 0.5 - 2.5MOQ: 10 Pieces
-
50 Ohm SMA-male Type Connector 0-20 GHz JumperUS$ 40 - 100MOQ: 1 Piece
