Cell No./Whatsapp/Wechat: 0086 15145386673
The H type safety joint, which is installed on the position required for subsurface drill stem and can bear in fishing operation all kinds of loads for pulling or pressing and used to transmit torque, is a subsurface safety equipment. In down hole operation, in case of being needed, the safety joint is easy to be discharged off so as to take out the drill stem above it. It is easy to butt the safety joint to go on fishing operation when running in hole again.
| Type | O.D. | Connection | I.D. | OAL |
| (mm) | API | (mm) | (mm) | |
| HJ105-1-00 | 105 | NC31 | 48 | 730 |
| HJ121-1-00 | 121 | NC38 | 50.8 | 805 |
| HJ178-1-00 | 178 | NC50 | 70 | 1065 |
| HJ203-1-00 | 203 | 6-5/8"REG | 80 | 1048 |
| When ordering or requesting quotation, if size out of above specification, pls. specify clearly. | ||||
Send Inquiry to This Supplier
You May Also Like
-
Concave Bottom Junk MillUS$ 150 - 500MOQ: 1 Set
-
IBOP For Top Drive (Upper/Lower Safety Valves)/ Varco / ITAG / Canrig / NOV IBOPUS$ 1000 - 3000MOQ: 1 Set
-
Saver Sub for Top DriveUS$ 100 - 280MOQ: 1 Piece
-
ActuatorUS$ 100 - 500MOQ: 1 Piece
-
Crank for Actuator, Use Together With Upper IBOPUS$ 50 - 200MOQ: 1 Piece
-
Ditch MagnetNegotiableMOQ: 1 Set
-
Lifting PlugNegotiableMOQ: 1 Set
-
Lifting SubsNegotiableMOQ: 1 Set
-
Mud Backet(Saver)NegotiableMOQ: 1 Set
-
Pin Drive Roller Kelly BushingsNegotiableMOQ: 1 Set