Pin Drive Roller Kelly Bushings
The pin Drive roller kelly bushing provides the following advantages:
**Pulling out or putting in string can be done while rotating
**Because of its integral construction,it can not fly out and hurts you;
**The bushing is easily installed into the master bushing, maintaining good alignment;
**The contact between kelly and roller is rolling contact,so friction is lower, and drill pressure is accurate
| Type | kelly size | Rotary table | Drive hole Dia. | Center Distance of the Drive hole |
| mm(inch) | mm(inch) | mm(inch) | mm(inch) | |
| BFK-6F-B4 | 133.4(5-1/4'') | 952.5(37-1/2'') | 86.2(3-25/64'') | 654(25-3/4'') |
| When ordering or requesting quotation, if size out of above specification, pls. specify clearly. | ||||
Send Inquiry to This Supplier
You May Also Like
-
Drop-in Check ValvesNegotiableMOQ: 1 Set
-
Float Valve (Flapper Type Check Valve) & Float Valve SubNegotiableMOQ: 1 Set
-
Full Open Safety ValvesNegotiableMOQ: 1 Set
-
Inside Bop ValvesNegotiableMOQ: 1 Set
-
Kelly ValvesNegotiableMOQ: 1 Set
-
Tubing ValvesNegotiableMOQ: 1 Set
-
Roller ReamersNegotiableMOQ: 1 Set
-
Diameter Changeable StabilizersNegotiableMOQ: 1 Set
-
Integral Mandrel Sleeve StabilizersNegotiableMOQ: 1 Set
-
Integral Spiral Blade StabilizersNegotiableMOQ: 1 Set