Contact Platform Support
Help Center2 / 4 Phase Stepper Motor Drivers For Nema34 Motor
Related Products
-
Stepper Motor Driver CW1108 For Nema42 Stepper MotorUS$ 4 - 100MOQ: 1 Piece -
Two Phase Stepper Motor Driver CW230 For Nema17 Stepper MotorUS$ 4 - 100MOQ: 1 Set
-
8 Digital Display Single Shaft Stepper Motor ControllersUS$ 4 - 100MOQ: 1 Piece
-
2450V DC Brushless Motor ControllerNegotiableMOQ: 1 Set
-
VFD Inverter, Variable Frequency Device InverterUS$ 4 - 100MOQ: 1 Set
Certification:CE,ROHS,ISO9000,SGS
2 / 4 Phase Stepper Motor Drivers For Nema34 Motor Characteristics:
1.DC power input type:24V~80V
2.Output current:2～6A
3.Mircostepping:1(1.8º), 1/2, 1/4, 1/8, 1/16, 1/32, 1/64, 1/128, 1/256
1/5, 1/10, 1/25, 1/50, 1/125, 1/250
4.Protect form : Overheated protect, lock automatic half current , error connect protect
5.The maximum pulse rate is 200HZ.
6. Dimensions:147mm*97mm*30mm
7.Weight:600g.
8.Working environment:Temperature-15～40℃ Humidity<90%.
I/O Ports:
1, VCC+:DC power positive pole
Note:Must guard against exceeding 80V,
so as not to damage the module
2, GND:DC power cathode
3, A+, A-:Stepping motor one winding
4, B+, B-:Stepping motor other winding
5, CP +, CP -:Stepping pulse input+5V (Rising edge effective , rising edge duration >10μS)
6, CW +, CW-:Stepping motor direction input, voltage level touched off, high towards, low reverse
7, REST+, REST-: motor free The interface see
the right picture
.NOTE:
1, When ambient temperature is high or working current over 3A, fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time.
2, Half current automatically: if control machine not send out signal in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric
3, The fault phase is protected : When the double-phase electrical machinery is connected with driver , users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check whether the wiring of electrical machinery is a mistake
Switch Choice: (“ON=0, OFF=1”)
1, Microstepping choice:
|
SW5 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
1 |
1 |
1 |
|
SW6 |
0 |
1 |
0 |
1 |
0 |
1 |
0 |
1 |
0 |
1 |
0 |
1 |
0 |
1 |
|
SW7 |
0 |
0 |
1 |
1 |
0 |
0 |
1 |
1 |
0 |
0 |
1 |
1 |
0 |
0 |
|
SW8 |
0 |
0 |
0 |
0 |
1 |
1 |
1 |
1 |
0 |
0 |
0 |
0 |
1 |
1 |
|
Micro |
1/2 |
Send Inquiry to This Supplier
You May Also Like
-
Books Hard Cover Cutter Magazine Glue Cover Removal Papers Spine Cutting MachineUS$ 1500 - 2250MOQ: 1 Set
-
Automatic Rotary Egg Tray Equipment / Egg Tray Production LineNegotiableMOQ: 1
-
Automatic Paper Recycling Machine for Produce Craft Paper From Www.frdpapermachine.comNegotiableMOQ: 1 Set
-
Toilet Paper Cutter/Kitchen Towel Cutting Machine Price With High PerformanceUS$ 1,500 - 2,000MOQ: 1 Set
-
Best Quality Factory Price Jumbo Roll Paper MachineUS$ 2,000 - 3,000MOQ: 1 Set
-
30 Pcs Egg Tray Moulding MachineUS$ 7,000 - 7,000MOQ: 1 Set
-
Tissue Paper Making Machine,Toilet Paper MakingUS$ 50,000 - 500,000MOQ: 1 Set
-
2016 Style Qingdao A4 Paper Cross Cutting Machine With Low PriceUS$ 10,000 - 150,000MOQ: 1 Set
-
3600mm Multi Wire Fluting Paper Machine Production Line Made Paper in 110-250gsmUS$ 160,000 - 250,000MOQ: 1 Set
-
New Design Industrial Waste Paper Pencil Making MachineUS$ 1 - 1,000MOQ: 1 Set
