SPJ-PM Viscosity Reducer Agent

Brief introduction SPJ-PM series viscosity reducer agent is mainly applied to the production and processing of EPVC resin. It can reduce the viscosity and stability of the paste resin. SPJ-PM series can also be used in the oil industry, detergents, pesticides, textile and other industries. Common properties Main composition: polyoxyethylene, alkylphenol, ether Ionity: non-ionic Quality index Item SPJ-PM-Ⅱ SPJ-PM-Ⅲ Appearance colorless or straw yellow sticky liquid Color(Pt-Co) ≤50 ≤80 pH (1% aqueous solution) 6.0~8.0 6.0~7.0 Hydroxyl value (mgKOH/g) 85~95 92~102 Cloud point (℃) 52~58 58~62 Fugitive constituent (%) ≤0.5 ≤0.5 Residue of ignition (%) ≤0.2 ≤0.2 Content (%) ≥99.0 ≥99.0 Packing and storage 1. This product is packed in iron drums, net weight: 200Kg; or packed according to client's requirements. 2. Please prevent it from collision, insolation, rain and inversion, and store it in dry, cool, shady and ventilated places. 3. Effective period: 12 months. After the effective period, it can also be used if tested to be qualified. Attention Please use it following Labor Protection Rules of Chemicals. Application technical SPJ-PM Viscosity reducer Please add SPJ-PM Viscosity reducer (the usage was 0.1-1.0% of emulsion) into the reactor after the emulsion polymerization of EPVC resin finished. Stir it to uniform, dry it, and then you will get low viscosity EPVC resin. Or add SPJ-PM Viscosity reducer (0.5-2.0% of resin) into the reactor between the producing processes of EPVC resin. The usage depends on its viscosity. SPJ-PM Viscosity reducer When the room temperature is lower than 10℃, please heat the product before using it in order to keep its high flexibility.