Double Clamp Digital Phase Meter VICTOR 4000

Influence Quantity

Base Condition

Working Conditions

Remark

Ambient Temp

23°C±1°C

-10°C~40°C

Ambient Humidity

40%~60%

<80%

Signal Waveform

sine wave

sine wave

β=0.05

Signal Frequency

50HZ±1HZ

45HZ~65HZ

Meter Working Volt

9V±0.1V

9V±1V

External Electric, Magnetic Field

To be avoided

Measured Wire Position

Measured wire at approximately the geometric center of the clamp

Function

Phase, AC current, AC voltage, AC leakage current, direct test of phase sequence; transformer groups, inductive, capacitive circuit discrimination; indirect test of power factor and power

Power

DC9V alkaline batteries(1.5V AA×6)

Consumption

About 35mA at most with enabled backlight, battery working continuously for about 40 hours

-3-

 About 5mA with disabled backlight, battery working continuously for about 300 hours

Display Mode

LCD display, blue backlight, suitable for dark places

LCD Size

70mm×62mm

LCD Display Field

64mm×54mm

Meter Size

Length, Width, Height:196mm×92mm×54mm

Clamp Size

φ7.5mm×13mm

Sampling Rate

About 3 times/second

Measurement Range

AC Voltage:0~20V/200V/500V

AC Current:0~200mA/2A/10A

Phase:0~360°

Measured Signal Amplitude in Phase Test

U1-U2 phase test:30V~500V

I1-I2 phase test:10mA~10.00A

U1-I2 or I1-U2 phase test:10V~500V, 10mA~10.00A

Data Hold

Press HOLD key to keep data, "DH" symbol appears

Automatic Shutdown

Automatic shutdown about 15 minutes later after launching to reduce battery consumption

Voltage Detection

 Low battery symbol “     " appears to remind the replacement of battery when the battery voltage drops below 7.8V~8V.

Weight

Main Unit about 550g(with battery), clamp about 170g×2, test line about 250g

Test Line Length

1.5m

Current Clamp Length

2m

Working Temperature and Humidity

-10°C~40°C;below 80%Rh