PoE Fiber Media Covnerter

Introduction

This product supports IEEE802.3 10base T/ IEEE802.3u 100base T/100base Fx protocol and IEEE802.3af PoE PSE application, internal AC/DC power supply and PSE controller can output up to 25 watts (DC48V/540mA) power into CAT5 twisted-pair cable.

Main feature

1. In conformity to IEEE 802.3 10 Base-T standard; in conformity to IEEE 802.3u 1000 Base-TX/FX standard, IEEE802af PoE PSE compatible

2..Supports flow control for full and half duplex operation

3. Bandwidth control

4..Supports auto MDI-MDIX function

5. Supports link fault pass through function

Technical parameter

Standard protocol

IEEE802.3 10 Base-T standard; IEEE802.3u 100 Base TX/FX standard, IEEE802.3af

Interface

*RJ-45 interface

The transmission media adopts CAT5 twisted-pair with maximum length of 100 meter (330 feets).

*Fiber interface

SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber transceiver).

*Power supply interface

The AC power supply is connected to AC input jack of media converter through the attached AC power cable.

Connector

one UTP RJ-45 connector, one SC/ST connector, one AC-inlet connector;

Operation mode

full duplex mode or half duplex mode

Cable

*TP cable: Cat5 UTP cable

*Optical fiber cable

Multi-mode: 50/125,62.5/125 or 100/140 micron

Single mode: 8.3/125,8.7/125,9/125 or 10/125 micron

Power supply: 100-240VAC

Operation temperature: 0℃-50℃

Relative humidity: 5%-90%

Dimension

Power internal: 155mm(L)*110mm(W)*40mm(H)