Contact Platform Support
Help CenterCarbon Steel Tank for Water Treatment Equipment
Related Products
RO water treatment equipment
1.Material:Stainless steel
2.Automatically and manually wash RO membrane
3.Capacity:5000L/H
The water tank is part of Reverse Osmosis Water Purification System
The system is adopted BW30-400 from Filmtec, with high desalination rate 98% and recyled rate 50-75%. The whole system has been proved by many bottled purewater manufacturer, it can get rip of the bateria, heavy metal, radioactive matter, organics and reaches the rate 99.99%,95%,99% and 95% respectivly.
Function of Components
Quartz Sand
Raw water into the filter for a simple mechanical filter, mainly to remove suspended solids in water, colloidal particles and other large impurities in the water when the water pressure and the pressure difference over 10Psi (0.7kg/cm2) or water SDI> 5.
Active Carbon
Activated carbon is used wood, coal, shell (nuclear) and other carbonaceous material made by chemical or physical method activation. It has a very large number of pores and specific surface area, which has a strong physical adsorption capacity, the effective adsorption of organic pollutants in water. Primarily to remove organic matter in raw water, chlorine, odor, color, etc., so that the original residual chlorine in water ≤ 0.1mg / l, effective protection of RO membrane from chlorine damage to parts of activated carbon typically 12 to 18 months to replace a The main residual chlorine as determined in raw water.
Softener
Get rid of the Calcium and Magnesium,which made the water hard.It use ion exchange resin to change the hardness ion.
Membrane
has a low operating pressure (low pressure compared with conventional composite reverse osmosis membranes operating pressure reduced by about 25% -40%), while maintaining high desalination rate.
water treatment tank
1: SS304 or 316 stainless steel
2: various capacities avaliable
3: CE & ISO certification
water treatment tank
|
product model |
100L |
150L |
200L |
250L |
300L |
400L |
500L |
|
inner vessel diameter(mm) |
φ370 |
φ370 |
φ470 |
φ470 |
φ470 |
φ600 |
φ600 |
|
water tank dimension(mm) |
φ470 |
φ470 |
φ560 |
φ560 |
φ560 |
φ700 |
φ700 |
|
material and thickness of the inner vessel |
SUS304 1.2 |
SUS304 1.2 |
SUS304 1.5 |
SUS304 1.5 |
SUS304 1.5 |
SUS304 2.0 |
SUS304 2.0 |
|
material and thickness of the shell |
Color Steel0.55 |
Color Steel0.55 |
Color Steel0.55 |
Color Steel0.55 |
Color Steel0.55 |
Color Steel0.55 |
Color Steel0.55 |
|
layerinsulation thickness(mm) |
50 |
50 |
45 |
45 |
45 |
50 |
50 |
|
connector size of inlet&outlet |
3/4" |
3/4" |
1" |
1" |
1" |
1" |
1" |
|
connector size of copper coil |
1/2" |
1/2" |
1/2" |
1/2" |
1/2" |
1/2" |
1/2" |
|
rated heating power |
1.5KW |
1.5KW |
1.5KW |
1.5KW |
2.5KW |
2.5KW |
2.5KW |
|
Overall dimension(references)(mm) |
φ470×1040 |
φ470×1440 |
φ560×1260 |
φ560×1520 |
φ560×1810 |
φ700×1550 |
φ700×1850 |
|
Packing case size(mm) |
550×550×1120 |
550×550×1500 |
640×640×1330 |
640×640×1600 |
640×640×1870 |
780×780×1650 |
780×780×1950 |
Send Inquiry to This Supplier
You May Also Like
-
Water Bath SterilizerNegotiableMOQ: 1 Set -
Cold Press Compactor EPS Foam Melter and Compressor Hot Melt Cold Press Crusher With Hot Melt and Cold PressUS$ 2599.00MOQ: 1 Set
-
Replaceable Knives Wood Chipper Digital Maximize Efficiency for BiomassNegotiableMOQ: 1 Set
-
M931 Pex Plastic Water Ice LineNegotiableMOQ: 1
-
Nickel-Iron FoamNegotiableMOQ: 10 Square Miles
-
Refuse IncineratorUS$ 5900 - 25000MOQ: 1 Piece
-
Portable Foam Wall Chemical Oil Proof 750 Gallon Flexible Pvc Spill Containment BermNegotiableMOQ: 1
-
More Than 20 Years Factory Supply Plastic Baler MachineNegotiableMOQ: 1 Set
-
Plastic To Oil Pyrolysis Plant (Continuous Type - 3TPD to 24 TPDUS$ 298,000 - 1,344,000MOQ: 1 Plant
-
Oil Drilling Cutting Waste ManagementNegotiableMOQ: 1 Set
