IEC 60884-1 Socket and Plug Withdrawal Force Test Apparatus
Maximum and minimum withdrawal force Test Apparatus
1.Introduction
l .The HT Socket and Plug Strength Tester is designed to meet the exacting requirements of major international standards such as IEC 60884-1 Fig 18 and Fig 19. The clamping system is easy to operate. The top plate swivels up from a horizontal position to a vertical orientation and the clamping device can be rotated in the top plate. These features allow the device to be set up in many different configurations to meet different standard requirements. Standard plugs and weights are supplied to perform testing on sockets rated up to 16A. Test plugs made from hardened steel with roughness not exceeding 0.8mm.Top plate pivots from horizontal to vertical.
2.Specification
● Standard configuration: 2-pin 10A plug, 3-pin 10A plug, 3-pin 16A plug, 10A and 16A pin gauges
● Includes weights and clamp for each one set.
Send Inquiry to This Supplier
You May Also Like
-
EN60350-2 Figure Z1 Standardized CookwareUS$ 500 - 20000MOQ: 1 Set
-
IEC60884-1 Figure 13 Socket-Outlet Lateral Strain Test ApparatusUS$ 1000 - 1500MOQ: 1 Set
-
IEC60335-2-9 Figure 104 Test Vessles for Testing Induction HotplateUS$ 2000 - 2000MOQ: 1 Piece
-
IEC60335-2-6 Fig.101 Test PotsUS$ 2000 - 2000MOQ: 1 Piece
-
GB21456 Vessels Test Pans for Household Induction CookersUS$ 2000 - 2000MOQ: 1 Piece
-
EN60350-2 Test Vessels for CookwareUS$ 5300 - 5300MOQ: 1 Piece
-
5KV AC DC Hipot TesterUS$ 330 - 330MOQ: 1 Piece
-
IEC 60065 61558 Mandrel Test DeviceUS$ 1500 - 1500MOQ: 1 Piece
-
IEC60065 Plug and Socket-outlet Torque Test DeviceUS$ 1300 - 1300MOQ: 1 Piece
-
500V Insulation Resistance TesterUS$ 700 - 700MOQ: 1 Piece