Contact Platform Support
Help CenterESD-2000Q ESD Gun Electrostatic Discharge Simulator
Related Products
-
LSG-6K10 IEC61000-4-5 Lightning Surge GeneratorUS$ 3500 - 3500MOQ: 1 Piece -
30KV Electrostatic Discharge Generator With ESD GunUS$ 3500 - 4000MOQ: 1 Piece
-
IEC61000-4-5 6KV Lightning Surge Generator With 10A CDNUS$ 4000 - 4000MOQ: 1 Piece
-
IEC61000-4-4 Electric Fast Transient Simulator With 16A CDNUS$ 6000 - 6000MOQ: 1 Piece
-
IEC61032 Rigid Finger ProbeUS$ 120 - 120MOQ: 1 Piece
ESD-2000Q Electrostatic Discharge Generator
1) Introduction:
ESD simulator (ESD gun) is completely meet the requirements of IEC61000-4-2 and GB/T17626.2. The ESD generator is designed for the assessment of electrical and electronic equipment to withstand ESD performance. Electrostatic discharge generator is widely apply to the fields of industry control equipment, household appliance, chemical electronics,communication electronics,components, auto control equipment and etc.
2. Parameters:
1) Contact discharge:1－30kV ±3％, Air discharge:0.1－30kV ±3％
2) Holding time:>5s
3) Polarity of output voltage: Positive, negative, positive/negative auto
4) Trigger mode: Single,counting,20pps,other
5) Discharge interval:0.05~99.99s
6) Numbers of discharge:1~9999
7) Energy storage capacitance:150pF ±10％(replaceable)
8) Discharge resistor:330Ω ±10％（replaceable)
9) Waveform of contact discharge:Meet the standards of EN/IEC 61000-4-2，GB/T 17626.2
10) Rising time:0.8ns ±25％
11) Environment:Temperature:15°C－35°C;Humidity:10%－75%
12) Power supply:AC220±10％，50/60Hz，300W
Send Inquiry to This Supplier
You May Also Like
-
IEC61032 Test Probe 41US$ 80 - 80MOQ: 1 Piece
-
British BS1363-2 Plug & Socket GaugeUS$ 500 - 500MOQ: 1 Piece
-
UL498 American Plug and Socket GaugeUS$ 500 - 500MOQ: 1 Piece
-
AS/NZS3112 Australia Plug and Socket GaugesUS$ 200 - 200MOQ: 1 Piece
-
Portable LED Colorimeter With 10cm Integrating Sphere for CCT and CRI TestUS$ 1500 - 1500MOQ: 1 Piece
-
LED Multiplex Temperature Logging MeterNegotiableMOQ: 1 Piece
-
IEC60061-3 E27/E14/E26/B22/E39/ E40 Gauge Go Not Go for Lamp Cap and Lamp HolderNegotiableMOQ: 1 Piece
-
G13 Lamp Cap Gauge in Accordance With IEC60061-3 Standard 7006-44-4 and 7006-45-4US$ 570 - 570MOQ: 1 Piece
-
GU10 Go No Go Gauge 7006-121-1US$ 450 - 450MOQ: 1 Piece
-
IEC60529 IPX3 and IPX4 Oscillating Tube Waterproof Testing MachineUS$ 7200 - 7200MOQ: 1 Piece
