Contact Platform Support
Help Center
Related Products
-
Wall Washer Light Good Strength Two-component Silicone PottingUS$ 4.8 - 5.0MOQ: 200 Kilograms -
Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.5 - 4.7MOQ: 200 Kilograms
-
Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.5 - 4.7MOQ: 200 Kilograms
-
High Potting Production Efficiency Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.2 - 4.4MOQ: 200 Kilograms
-
Electronic Potting Compound Silicone for Power Supplies and LED 10kg/barrelUS$ 4.8 - 5.0MOQ: 200 Kilograms
Wall washer light exclusive potting is a condensed silicone which can rapidly cure at room temperature. It is made of a domestic high-quality raw materials. It consists of two liquid components A and B. When the two components are thoroughly mixed at a weight ratio of 100: 10, the mixed liquid will solidify into a flexible elastomer at room temperature. The duration of application and the curing time at room temperature are independent of the amount of material. There was no obvious shrinkage and temperature rise during curing. Rubber material no toxin, no corrosion; fully cured material has UV resistance, anti-aging performance, repairability and excellent weather resistance.
Before curing
Order number | Item | Index | Note | |
1 | Surface | Viscous fluid | Visual | |
2 | Color | A: transparent viscous fluid B:light yellow viscous fluid | ||
3 | viscocity (25℃，MPa) | 1360±300 | A component | |
4 | mix ratio | A:B=100:10 | ||
5 | Surface dry time(min) | 40～60 | ||
6 | Sulidification time（H） | 24 | ||
7 | Operation time（min） | 20-30 | ||
8 | Specific gravity（g/cm3） | 1.23+0.02 | A component | |
After curing：
Order number | Item | Index | Note |
1 | Hardness (shore A)≤ | 5 | |
2 | Tensile strength（Mpa）≥ | 0.50 | |
3 | Breaking elongation(%)≥ | 120 | |
4 | Volume resistivity(Ω.cm) ≥ | 1×1015 | |
5 | Break voltage（KV/mm）≥ | 14 | |
6 | Dielectric constant（1MHZ） | 3.0 | |
7 | Temperature range（℃） | -45～150 | |
Note: All of the data above was obtained in the 25 ℃, 55% RH of the silicone for 7 days after curing.
Performance features
●Excellent adhesion, outdoor moisture waterproof effect is obvious
●Excellent weather resistance, can be used for a long time outdoor
●No corrosion, suitable for a variety of electronic potting
●colloid flexible, have a good anti-vibration impact and deformation capacity
●Good liquidity, high potting production efficiency
●High insulation, potted products has high stability
Use restrictions
This product has not been tested or shown to be suitable for medical use or pharmaceutical use.
Send Inquiry to This Supplier
You May Also Like
-
RTV Silicone for Electronic Potting Rubber Electronic Grade Silicon 20kg/barrelUS$ 4.8 - 5.0MOQ: 200 Kilograms
-
Shenzhen Tensan 1001 5ml 10pcs 1.0W/m.K High Quality Thermal Conductive Grease/paste/ Compound for Cpu/led Heat SinkUS$ 10 - 11MOQ: 200 Pieces
-
Shenzhen Tensan TS1002 10ml 20pcs 1.0 W/m.K Conductive Silver Paste High Thermal Conductive Thermal GreaseUS$ 20 - 22MOQ: 200 Pieces
-
5ml 100pcs Tensan High Thermal Conductive Cooling Paste Grease for CPUs GPUs VGA High Performance Silver ThermalUS$ 100 - 110MOQ: 200 Pieces
-
5ml 500pcs Tensan High Thermal Conductive Cooling Paste Grease for CPUs GPUs VGA High Performance Silver ThermalUS$ 500 - 550MOQ: 200 Pieces
-
1000pcs Good Thermal Conductivity and Dielectric Properties 10g Thermal Grease for Led LightUS$ 1000 - 1100MOQ: 200 Pieces
-
TS 1002 5ml 10 Piece 4.5W/mK 10ml/piece High Thermal Conductivity Good Waterproof Grease Paste Electrical ProductsUS$ 11 - 13MOQ: 200 Pieces
-
20ml Thermal Grease for "Jack of All Trades" of CPU Cooling/TS1001US$ 13.5 - 15MOQ: 500 Barrels
-
Tensan TS 1001 5ml 1PCS Silicone High Thermal Conductive Grease Paste for CPU/LEDUS$ 0.9 - 1.1MOQ: 200 Pieces
-
Tensan TS 1001 10ml 1PCS High Thermal Conductivity Silicone Grease For Power SupplyUS$ 1.1 - 1.3MOQ: 200 Pieces
