Contact Platform Support
Help Center
Related Products
-
Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.5 - 4.7MOQ: 200 Kilograms -
High Potting Production Efficiency Good Strength Two-component Silicone Potting for LED Wall Washer LightUS$ 4.2 - 4.4MOQ: 200 Kilograms
-
Electronic Potting Compound Silicone for Power Supplies and LED 10kg/barrelUS$ 4.8 - 5.0MOQ: 200 Kilograms
-
RTV Silicone for Electronic Potting Rubber Electronic Grade Silicon 20kg/barrelUS$ 4.8 - 5.0MOQ: 200 Kilograms
-
Condensation Type Silicone Encapsulating GelUS$ 4.5 - 4.7MOQ: 200 Kilograms
Wall washer light exclusive potting is a condensed silicone which can rapidly cure at room temperature. It is made of a domestic high-quality raw materials. It consists of two liquid components A and B. When the two components are thoroughly mixed at a weight ratio of 100: 10, the mixed liquid will solidify into a flexible elastomer at room temperature. The duration of application and the curing time at room temperature are independent of the amount of material. There was no obvious shrinkage and temperature rise during curing. Rubber material no toxin, no corrosion; fully cured material has UV resistance, anti-aging performance, repairability and excellent weather resistance.
Before curing
Order number | Item | Index | Note | |
1 | Surface | Viscous fluid | Visual | |
2 | Color | A: transparent viscous fluid B:light yellow viscous fluid | ||
3 | viscocity (25℃，MPa) | 1360±300 | A component | |
4 | mix ratio | A:B=100:10 | ||
5 | Surface dry time(min) | 40～60 | ||
6 | Sulidification time（H） | 24 | ||
7 | Operation time（min） | 20-30 | ||
8 | Specific gravity（g/cm3） | 1.23+0.02 | A component | |
After curing：
Order number | Item | Index | Note |
1 | Hardness (shore A)≤ | 5 | |
2 | Tensile strength（Mpa）≥ | 0.50 | |
3 | Breaking elongation(%)≥ | 120 | |
4 | Volume resistivity(Ω.cm) ≥ | 1×1015 | |
5 | Break voltage（KV/mm）≥ | 14 | |
6 | Dielectric constant（1MHZ） | 3.0 | |
7 | Temperature range（℃） | -45～150 | |
Note: All of the data above was obtained in the 25 ℃, 55% RH of the silicone for 7 days after curing.
Performance features
●Excellent adhesion, outdoor moisture waterproof effect is obvious
●Excellent weather resistance, can be used for a long time outdoor
●No corrosion, suitable for a variety of electronic potting
●colloid flexible, have a good anti-vibration impact and deformation capacity
●Good liquidity, high potting production efficiency
●High insulation, potted products has high stability
Use restrictions
This product has not been tested or shown to be suitable for medical use or pharmaceutical use.
Send Inquiry to This Supplier
You May Also Like
-
Wall Washer Light Good Strength Two-component Silicone PottingUS$ 4.8 - 5.0MOQ: 200 Kilograms
-
Two-component Electronic Thermal Silicone for Potting and Protection of Electronic ProductsUS$ 2.3 - 2.5MOQ: 200 Kilograms
-
Two-component Gray UV Resistance Electronic Thermal Silicone for Potting and Protection of Electronic ProductsUS$ 2.4 - 2.6MOQ: 200 Kilograms
-
Two Components ROHS/MSDS Electronic Potting Silicone Compounds 5kgs/barrelUS$ 3.0 - 3.2MOQ: 200 Kilograms
-
Heat Conductive Silikon Sealant Two Components Thermal Conductive Silicone RubberUS$ 3.7 - 3.9MOQ: 200 Kilograms
-
Hot Sale Silicone Rubber Two Component Potting Sealent Used in LED SpotlightUS$ 3.7 - 3.9MOQ: 200 Kilograms
-
Tensan High Quality Waterproof Addition Type Liquid Silicone Rubber for Electronic Appliances 10kg/barrelUS$ 2.3 - 2.5MOQ: 200 Kilograms
-
High Quality Heat Resistant Silicone Adhesive for Solar Module for LED Lighting /100mlUS$ 1.1 - 1.3MOQ: 500 Pieces
-
Small Tube Neutral Silicone Sealant for ABS Plastics /300mlUS$ 2.4 - 2.6MOQ: 500 Pieces
-
Environmental Waterproof Siliconesealant Red/black/grey/black Rtv Silicone Sealant/adhesive /2600mlUS$ 14.7 - 14.9MOQ: 60 Pieces
