Flat EP Conveyor Belt

Specifications

General Conveyor Belt,Nylon Conveyor Belt,EP Conveyor Belt,Chevron Conveyor Belts,Heat-resistant Conveyor Belt and ect.

Conveyor belt including:

-geberal use conveyor belt

-Nylon conveyor belt

-EP conveyor belt

-Heat-resistant conveyor belt

-Cold-resistant conveyor belt

-Anti-static conveyor belt

-Acid and Alkali Resistant conveyor belt

-Light conveyor belt

-Annular Conveyor belt

-Pattern Conveyor belt

-Elevator belt

-cotton conveyor canvas belt.

1. Use: It is suitable for conveying materials at medium or long distance and under conditions of heavy load and high speed.
2. Varieties: In accordance with the characteristics of the covered rubber.there are belts of general,heat resistance, fire resistance, cold resistance, acid-basic resistance,and oil resistance.
3. Characteristics:

(1)Under standard load condition ,the spreading atio is small,The spreading is small in use.

(2)The flexure is good .As a result a trough can be easily made.

(3) It resists impact and wear.

(4)The water resistance is good .When damp or in water,it can be used without any decrease of the strength.

(5)As the mode number of EP is greater ,if a design for conveyer belt is made, lower safety efficient can be adopted.

(6)Resistance to heat is stronger.

(7)No corrosion of mould will occur.

(8)It is in line with the National Standard GB7984-87.

4.Specifications:

(1)Types:EP-150 EP-200 EP-250 EP-300 EP-400

(2)Width:300to2000mm

(3)Layers of fabric: 2to6

(4)Thickness of the covered rubber: Upper:3.0 4.5 6.0mm Lower:1.5 3.0 4.5mm

(5)Length of each roll:100m.

 

Specification Chart:

Material	Layer number	width(mm)	lenght	Cover Thickness
				top(mm)	bottom(mm)
Cotton	3-8	300-2000	According to Customer's Demand	3.0 4.5 6.0 mm	1.5 3.0 4.5 mm

 

cover	Performance	Unit	Cotton carcass
	Tensile strength	MPa≥	18
	Elongation at break	%≥	350
	Hardness	Degree (shore)	55-65
	Abrasion loss	CM3/1.61Km≤	0.8