JRC-1 Rock Joint Roughness Coefficient Apparatus (Tilt Test)
Features
a. It is used to calculate the JRC of a rock or of a joint.
b. The equipmen consists of an adjustable inclined plane,on which the rock sample (100mm dia.max.)is placed,separeted along the surface where roughness is to be measured.
c. Then the plane is slowly tilted until sliding of the upper part of the sample on the lower one occuers.
d. From the measured inclination angle it is possible to evaluate the roughness index.
Our products are 100% supplied from the factory
If you are interested in our products, you can contact us directly or welcome to visit our site:
SKYPE ID: sun.nancy3
| Inclination angle | 0-50° | |||||
| Max. sample diameter | 100mm | |||||
| Overall dimensions | 270x170x260mm | |||||
| Weight approx | 4.5kg | |||||




Send Inquiry to This Supplier
You May Also Like
-
SGM-1 Rock / Stone Specimen Grinding Machine (single-direction)NegotiableMOQ: 1 Set
-
SDI-1 Slake Durability Apparatus of RockNegotiableMOQ: 1 Set
-
SGM-2 Specimen Grinding Machine(Double-direction)NegotiableMOQ: 1 Set
-
SVA-1 Rock Sample Verification ApparatusNegotiableMOQ: 1 Set
-
CT100 Core Trimmer for RockNegotiableMOQ: 1 Set
-
Lateral Resistance Expansion Rate Testing Apparatus for RockNegotiableMOQ: 1 Set
-
EPT-1 Rock Swelling Pressure Testing ApparatusNegotiableMOQ: 1 Set
-
PLT-1 Dial Gauge Type Point Load TesterNegotiableMOQ: 1 Set
-
PLT-1 Dial Gauge Type Point Load TesterNegotiableMOQ: 1 Set
-
DSA-30 Digital Display Rock Direct Shear Testing ApparatusNegotiableMOQ: 1 Set






