DTM-1 Micro-Deval Testing Machine
DTM-1 Micro-Deval Testing Machine
Standard: EN 1097-1, EN 13450
1. Characteristic
a. Used to determine the resistance to wear of aggregates.
b. The machine consists of a steel frame suitable to house for 154mm stainless steel cylinders or two 400mm stainless steel cylinders.
c. The machine stops automatically at the preset number of gyrations.
d. The machine is supplied without stainless steel cylinders and stainless steel spheres.
2. Accessories to EN 1097-1
a. DTM-1A Stainless steel cylinder 200mm dia. x 154mm long
b. DTM-1B Steel spheres 10mm dia. Pack of 20kg.
3. Accessories to EN13450
a. DTM-1C Stainless steel cylinder 200mm dia. x 400mm long.
Abrasive charge not required
Our products are 100% supplied from the factory
If you are interested in our products, you can contact us directly or welcome to visit our site:
SKYPE ID: sun.nancy3
| Power supply | 220V, 50Hz, 1phase | |||||
| Power | 1100W | |||||
| Overall dimensions | 1000x455x900mm | |||||
| Weight approx | 140kg | |||||


Send Inquiry to This Supplier
You May Also Like
-
LAAM-2A Los Angeles Abrasion Testing MachineNegotiableMOQ: 1 Set
-
LAAM-2 Los Angeles Abrasion Testing MachineNegotiableMOQ: 1 Set
-
SS-L Largae Capacity Sample SplitterNegotiableMOQ: 1 Set
-
RB-2 Aggregate Riffle Split BoxesNegotiableMOQ: 1 Set
-
RB-1Aggregate Sample Splitter Riffle BoxesNegotiableMOQ: 1 Set
-
ShovelNegotiableMOQ: 20 Sets
-
RB-2 Riffle BoxesNegotiableMOQ: 1 Set
-
TF-1 Freezing and Thawing Testing ChamberNegotiableMOQ: 1 Set
-
HM200 Laboratory Small Aggregate Hammer Mill CrusherNegotiableMOQ: 1 Set
-
DTM-1Micro-deval Aggregate Wear Resistance TesterNegotiableMOQ: 1 Set








