Water tank portable evaporative air cooler/Swamp evaporative air cooler/Humidity control water cooler

Evaporative air cooler

Application:

1)    Manufacturing: textile manufacturing, machine manufacturing, ceramic industry, chemical factory, metallurgic industry, hardware and leather industry…

2)    Processing industry: electronic processing, shoemaking industry, printing industry, rubber industry, garment factory, packinghouse, plating plant…

3)    Other industries: golf course, bakery, playground, hospital, restroom, school, waiting room, supermarket, restaurant, kitchen, vegetables market, entertainment, park, greenhouse, flowers cultivation base…

Technical Date:

Features:

1.    Especially designed durable blades and waterproof motor

2.    Thicker cooling pad is beneficial to absorb heat & increase the humidity

3.    Unique time setting function

4.    3 speed(Low, Medium, High) with low noise

Operation:

1.    Instructions:

1)      Operating temperature is between 18℃~45℃

2)      The added water needs to be clean and its temperature should be below 45℃

3)      The allowable load of Voltage fluctuation is (+/-)5%

4)      No dirt around

2.    Make sure the circuit connection is correct, or it will cause the machine damaged.

3.    Keep the wires safe from the bite of rats. Do not use the different metallic materials as wire. Do not trample the wire or elongate it exceeding its tensile strength.Orthe machine will short-circuit.

4.    Maintain the good ventilation when the machine is working to bring you a good using effect.

Operating Principle:

  The air passes through the cooling pad. Meanwhile the water is sent by the pump from the tank to cooling pad, where can get evaporation and then cool the ambient temperature.

Company Introduction

  Yong Shun Aeration-cooling Equipment Co., Ltd, which has more than 10 years' experience in manufacturing Negative Pressure Fan, is a professional private high-tech company located in Dongguan in 2005.

  Yong Shun is equipped with advanced equipment for R&D and manufacturing, also, sets up an integrated management system to the employees so as to provide the best sales and after- sales services to our customers.

  Our products are with good design and high quality, not only widely using in Plastic injection molding, Garment Textiles, electroplating, shoe industries, but also in animal husbandry industry, Green house, etc. We have already solved the temperature control problem for more than 3000 of our customers. There are more than 120 domestic and foreign dealers selling our products. And that, many of our products are obtaining more and more praise from our customers.