black fiberglass pole for antenna
1. telescoping fiberglass pole with extension length up to 18m
2.. wall thickness up to 2mm
3 .criss/cross winding
4..stronger joints of overlap
5. for all kinds of wire antennas
6. light weighted, can easily put them up
Brife Intruduction for the fiberglass telescopic tubes
A single person can easily put them up within a few minutes. Especially developed to make our portable equipment even more rugged and durable!
These are extremely strong poles, with a much greater wall thickness (up to 2mm!) than the usual "fishing rod" types. A special reinforcing winding technique - several layers of fiberglass are wound in alternating direction (criss/cross winding) - provides greatly increased lateral and linear strength. Stronger joints are achieved by a much larger overlap between the individual tube segments than usual.
They can also easily support temporary lightweight 1 Element Quad or Delta loops for 20-10m, and dipoles for all bands, especially when used with open wire feedline. (Most baluns would be somewhat heavy). 4-6 poles could be used to build lightweight beams for 40 or 80m.
Even the top segment is 8mm in diameter (and 1.4mm wall thickness), so the poles can be used to their full 12m length - unlike other poles where the top segment is very thin as a whip. The best (and cheapest) wire to use for building such wire antennas (verticals, loops, dipoles etc.) is AWG 18 (= 1mm diameter) enameled copper wire or similar. Thin fishing monofilament (1mm diameter) or similar rope is very suitable for guy lines.
Specification List for the Fiberglass Telescopic Tubes
fully extracted length (height) | 3.66m (12ft) |
transportation length | 1.14m |
weight | 0.5kg |
bottom diameter | 29mm |
top diameter | 6.5mm |
wall thickness | 0.8mm – 1mm |
number of segments | 4 |
pole material | black fiberglass, UV protected |
fully extracted length (height) | 5.5m (18ft) |
transportation length | 0.78m |
weight | 1.1kg |
bottom diameter | 39mm |
top diameter | 8mm |
wall thickness | 0.8mm – 1.5mm |
number of segments | 9 |
pole material | black fiberglass, UV protected |
fully extracted length (height) | 10m (33ft) |
transportation length | 1.18m (3ft 10") |
weight | 2.5kg (6lbs) |
bottom diameter | 55mm (2 1/6") |
top diameter | 4mm (1/6") |
wall thickness | 1.4mm - 2mm |
number of segments | 10 |
pole material | black fiberglass, UV protected |
fully extracted length (height) | 12m (40ft) |
transportation length | 1.18m (3ft 10") |
weight | 3.3kg (7lbs) |
bottom diameter | 55mm (2 1/6") |
top diameter | 4mm (1/6") |
wall thickness | 1.4mm - 2mm |
number of segments | 12 |
pole material | black fiberglass, UV protected |
fully extracted length (height) | 18m (60ft) |
transportation length | 1.70m (5ft 7") |
weight | 6.8kg (15lbs) |
bottom diameter | 73mm (2 5/6") |
top diameter | 8mm (1/3") |
wall thickness | 1mm - 2mm |
number of segments | 12 |
pole material | black fiberglass, UV protected |
Send Inquiry to This Supplier
You May Also Like
-
Outdoor/Indoor 2400-2483 MHz/2.4GHz 12dB Omnidirectional Fiberglass WIFI AntennaNegotiableMOQ: 100 Pieces
-
2.4G 802.11b/g/n 20W WIFI Signal Booster With 1000mW 2.4GHz Wifi Signal Booster 20W for 5km Outdoor WifiUS$ 5 - 40MOQ: 1 Piece
-
698-2700MHz 3x1 RF Hybrid Combiner 3 in 1 Out n Female Connector DC-3GHzNegotiableMOQ: 1 Piece
-
50 Ohm DC-3GHz 10W Dummy LoadUS$ 1 - 25MOQ: 1 Piece
-
Communication Relay Board S42024-L3237-A107US$ 10 - 2,000MOQ: 1 Piece
-
Optical SplitterUS$ 55 - 95MOQ: 100 Sets
-
UFL Base IPEX/UFL Connector for rf Cable Antenna and PCB ModuleUS$ 0.16 - 0.32MOQ: 100 Pieces
-
2400-2483MHz Wifi Fiberglass Omni 2.4ghz Dipole 9dBi AntennaNegotiableMOQ: 100 Pieces
-
Uhf & Vhf 433 MHz 5dB Omnidirectional Fiberglass Walkie Talkie AntennaNegotiableMOQ: 100 Pieces
-
Ameison 5.8GHz 5dBi High Performance Desktop Wifi Rubber Duck External Antenna for Huawei E5172NegotiableMOQ: 1000 Pieces





