Contact Platform Support
Help CenterFilament Spunbond Needle Punched Geotextile With Competitive Price
Related Products
-
Filament Spunbond Needle Punched Geo FabricUS$ 0.52 - 1.65MOQ: 10 Square Meters -
Polyester Yarns Spunbond Non Woven GeotextileUS$ 1.04 - 1.06MOQ: 1 Square Meter
-
Filament Spunbond Needle Punched Geotextile Fabric for FilterUS$ 0.52 - 0.6MOQ: 1000 Square Meters
-
Filament Spunbond Needle Punched Geotextiles for ConstructionUS$ 0.52 - 0.6MOQ: 1000 Square Meters
-
Filament Spunbond Nonwoven Geo FabricUS$ 0.52 - 0.6MOQ: 1000 Square Meters
Specifications
Filament Spunbond Needle Punched Geotextile with Competitive Price1.Excellent drainage performance
2.Widely used in landfill
Filament Spunbond Needle Punched Geotextile with Competitive Price
Product Description
100% Polyester Filament Spunbond Needle Punched Geotextile is made by polyester filament,
featured with good physical property,high tensile, resisiting tearing,bursting,stabling,etc.It
boasts excellent drainage,separation,filtration and protection performance.
Product Features
Good evenness
High strength
Tensile strength
Reduced flammability
High temperautre resistance (180°C-200°C)
Excellent filtration performance
Good humidity proof
Good air permeability
Product Specifications and Technical Parameters
|
item
|
Value
|
||||||||||
Nominal breaking strength /(KM/m) |
4.5 |
7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
||
1 |
Breaking strength(MD/CD)(KN/m) |
4.5 |
7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
|
2 |
Elongation at break (MD/CD)/% |
40-80 |
|||||||||
3 |
CBR mullen burst strength KN≥ |
0.8 |
1.6 |
1.9 |
2.9 |
3.9 |
5.3 |
6.4 |
7.9 |
8.5 |
|
4 |
Tear strength/KN |
0.14 |
0.21 |
0.28 |
0.42 |
0.56 |
0.70 |
0.82 |
1.10 |
1.25 |
|
5 |
Sieve size O90 mm |
0.05-0.20 |
|||||||||
6 |
Vertical permeability coefficient cm/s |
K×(10-1-10-3)K=1.0-9.9 |
|||||||||
7 |
Thickess/mm ≥ |
0. 8 |
1.2 |
1.6 |
2.2 |
2.8 |
3.4 |
4.2 |
5.5 |
6.8 |
|
8 |
Width variation% |
-0.5 |
|||||||||
9 |
Weight variation |
-5 |
|||||||||
Application Range
Automotive interiors
Home furnishing nonwovens
Heat transfer printing material
Filter media
Cable wrapping
Building material
Geotextile joints to connect
General Geotextile joints to connect there is overlap, welding and oversew three ways.
Note:If geotextile joints to connect on the flat ground, overlap width>30cm.
If geotextile joints to connect not on the flat ground, overlap width>50cm.
Raw Material
Used for Mine Project
Send Inquiry to This Supplier
You May Also Like
-
Low-permeability Geotextile-made Cement Blanket Geosynthetic Concrete Blanket Lining for Erosion and Sediment ControlUS$ 1 - 1.5MOQ: 100 Square Meters
-
2"x4"mesh Wire Backed Silt Fence Direct FactoryUS$ 10 - 20MOQ: 1 Roll
-
Polyester Long Fiber Continuous Filament Spunbond Needle Punched Nonwoven GeotextileUS$ 0.18 - 1.7MOQ: 5000 Square Meters
-
Wandafu Greenhouse Planting Heavy-Dut Landscape Gardening Weed Barrier MatUS$ 0.18 - 0.19MOQ: 10000 Square Meters
-
High-Strength Geotextile - Durable, Permeable for Road Construction & Drainage ProjectsUS$ 2 - 3MOQ: 100 Cubic Meters
-
YS020C Geotextile Vertical Permeability TesterNegotiableMOQ: 1 Unit
-
Polymer Protective Drainage Profiled Sheet Four-way Siphon Drainage Trough GeotextileNegotiableMOQ: 0
-
Unidirectional Plastic Geogrid for Soft Ground Treatment. Plastic Geogrid for Ground StabilizationUS$ 0.3 - 2.56MOQ: 100 Square Meters
-
250mm Outer Diameter Green Plastic Blind Ditch Weight 2400 GramsNegotiableMOQ: 1000 Square Meters
-
Mesh Interwoven Drainage Board, Plastic Geotextile Mat, Seepage Drainage 30mm ThickNegotiableMOQ: 1000 Square Meters
