CICQ Electric Concrete Pole Making Machine,concrete Electric Pole Factory
Precsast Concrete Cement Pipe Making Machine/hume pipes Machinery /drainage pipe production line
1. Product Introduction of Centrifugal type Concrete Pipe Machine
The machine takes sands, stones and cement as raw materials to produce many kinds of reinforced concrete drainage pipe with the length of 1000-4000mm, internal diameter of 200-4000mm with the mouth shapes of flat, tongue and groove and socket and spigot. All mechanical indexes have meet the national standards. They have been used widely in deep well, municipal drainage, expressway and other water supply and sewerage works with higher level required. The production efficiency can reach 4-5 piece/hour.
2. Characters of Centrifugal type Concrete Pipe Machine
The centrifugal machine is mainly used to manufacture the centrifugal equipments manufacturing the reinforced concrete drainpipes, driving the spinning of the drainpipe concrete pipe mold loaded with some concrete and reinforcing steel with a certain mixing ratio at different speeds, and the solid phase particles of concrete in steel mould will be centrifugal settling in the steel mould inner surface under centrifuge, meanwhile draining the excessive water, thus forming compacting concrete structure namely reinforcing concrete drainpipe. The machine mainly consists of riding wheels, shafts, bearing block, bearing, V-blet pulley, base and electromagnetic speed-controlling motor.
3. Technical Data of Centrifugal type Concrete Pipe Machine
| No. | Item | Unit | Model | ||
| Double-wheel | Three-wheel | ||||
| 1 | Riding wheel thread | MM | 1870 | ||
| 2 | Riding wheel wheelbase | MM | 1500-2800 | ||
| 3 | Riding wheel external diameter | MM | 800-920 | ||
| 4 | Riding wheel width | MM | 100 | ||
| 5 | Angle between wheel center and the center of steel mould | (°) | 75°-110 | ||
| 6 | The Max. length of molding drainage pipe | M | 2-4 | ||
| 7 | The Max. diameter of molding drainage pipe | Plain top/tongue and groove/pipe-jacking | MM | Φ2600 | Φ1800 |
| Bell and spigot | Φ1800 | Φ1800 | |||
| 8 | The motor power | KM | 37-90 | 55-132 | |
| 9 | The range of speed of main drive axle | r/min | 100-500(continuous) | 100-500(continuous) | |
1. Provide complete production line supporting machines with high performance and good quality;
2. Provide reasonable design of plant,office, warehouse etc and related drawings according to customers' requirements.
3. Provide all machines layout plan in production plant and responsible for the layout of machines.
4. Responsible for all Installation and commissioning of all machines as well as the workers production training.
5. Promise to supply required wearing parts of machines as per requirements of customers timely with favorable prices within 2 years.
Send Inquiry to This Supplier
You May Also Like
-
GXGN-12 Smart Solid Insulating CabineNegotiableMOQ: 1 Piece
-
10kv 630kva 200kva 315kva Three Phase Dry Type Power Distribution Transformers Indoor 100 Kva TransformerUS$ 9999 - 12999MOQ: 1 Piece
-
IP67 Plastic Portable Waterproof Electrical Power Distribution Boards BoxUS$ 10MOQ: 100 Pieces
-
Control Panel for Cable Conveyor, Pusher, Puller, Feeder, Hauler, Cable Dog – Start/Stop, Forward/Reverse, Speed Control & Frequency Setting UnitUS$ 50 - 80MOQ: 1 Combo
-
Power Distribution Cabinet & BoxNegotiableMOQ: 2000 Sets
-
GPRS Outdoor Alarm Controller S250,Three-Phase Power Line Protection,NC/NO/EOL Dry Contact,Remote Relay OutputUS$ 1 - 10MOQ: 1 Set
-
Chinese Outdoor Electric Meter Box Manufacturer With 30 Years ExperienceUS$ 2 - 15MOQ: 500 Pieces
-
Small Gear Reducer MotorUS$ 8 - 10MOQ: 1 Piece
-
Explosion Proof Electrical EquipmentUS$ 500 - 5,000MOQ: 1 Set
-
Temperature Indicator for Substation,outdoor, Industrial Use (Small Square)US$ 88 - 175MOQ: 40 Cases