High power led chip 100w 850nm ir led

Infrared light is mainly used for infrared thermal image, infrared camera, infrared spectrometer, infrared detector, infrared analyzer, etc. Such as: high temperature sterilization, infrared night vision equipment, monitoring equipment, mobile ir port, the door of the hotel card, car, television remote control, infrared induction of sink.

1.940nm: suitable to be used in remote controller, such as remote controllers for household appliances.

2.808nm: suitable to be used in physical treatment appliances, space optical communication, infrared illumination and the pumping sources of the solid-state lasers.

3.830nm: suitable to be used in the automated card reader system in freeway.

4.840nm: suitable to be used in colored zoom infrared waterproof video camera.

5. 850nm: suitable to be used in video cameras that are applied in digital photography, monitoring system, door phone, theftproof alarm and so on.

6.870nm: suitable to be used in video cameras in marketplace and crossroad.

 Product show

100W

1W

10W

30W

50W

Application Notes:

Storage

1. Before opening the package, the LED should be kept under the condition ≤30℃/90%RH. After opening the package, the LED should be stored under the condition ≤30℃/70%RH.
2. The LED should be used within a year. And after opening the package, the led should be used within 168 hours(7 days).
3. If the desiccant is faded or the led have exceeded the storage time, re-baking is required under the condition: 60+-6℃/ 24hrs.
4. The surface of LED is prone to attach dust so the relevant steps should be taken to keep the emitter free of dust.

Handling

Handle the component along the side surfaces by using forceps of appropriate tools. The forceps or other appropriate tools should not put any pressure on the lens, it’s also strictly forbidden to poke and press the lens.

Electrical

1. The LED can not be drove reversely.
2. It’s necessary to have the measures to limit the current otherwise slight voltage shift may cause enormous current change and results in the failure of LED.
3. It is recommended that the drive current should be lower when the light output is enough for applying. It would be helpful to improve the product’s reliability.

Antistatic

The LED are electrostatic sensitive devices, so antistatic steps should be taken during the processing.

Shipping

Company Information

VANQ is an On-site Corporation,R&D and Manufacturing,Sales&Service Integration with A complete industrial Chain.

1.Led chips are genuine,originally imported BridgeLux in the USA and Epileds from Taiwan.

2.We utilize Phosphor Intematix from the USA and Grand from Taiwan.

3.We use red copper led holder,with good heat management performance.

4.Gold Thread are original Konarka with 1.24mil and high gold purity 99.999%

Cetification:

Working show: