Contact Platform Support
Help CenterTCI (Tungsten Carbide Inserts) Tri Cone Drill Bit
Related Products
-
API Oil Drill Bits for Gas ExploringUS$ 10 - 1,000MOQ: 2 Pieces -
Drag Drill BitsUS$ 30 - 200MOQ: 10 Pieces
-
Hotselling Tungsten Carbide Drag BitUS$ 30 - 200MOQ: 10 Pieces
-
Stepped Drag Bit/Tungsten Carbide Drag BitUS$ 30 - 200MOQ: 10 Pieces
-
Six Blades PDC Non-coring BitUS$ 150 - 10,000MOQ: 10 Pieces
Specifications
>Leading manufacturer of Tricone Rock Bit>2-wing/ 3-wing/ 4-wing drag bits, etc.
>Good quality and favourable price.
TCI Tricone Bits Series
Soft formation TCI tricone bits:
The soft formation TCI tricone bits are used to drill low compressive strength, very soft formations. This bit maximized to use of both conical and chisel tungsten carbide inserts of large diameters and high projection. This cutting structure design, combined with maximum cone offset, results in high bit penetration rates. The deep intermesh of cutter rows prevents bit bailing in sticky formations.
Medium formation TCI tricone bits:
The medium formation TCI tricone bits features aggressive chisel tungsten carbide inserts on the heel rows and inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard for mations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Hard formation TCI tricone bits:
The hard formation TCI tricone bits can be used to drill hard and abrasive formations. Wear resistance tungsten carbide inserts are used in the outer rows to prevent loss of bit gauge. Maximum numbers of hemispherical shaped inserts are used in all rows to provide cutter durability and long life.
Medium hard formation TCI tricone bits:
The medium hard formation TCI tricone bits features robust chisel tungsten carbide inserts on the heel row and conical on the inner rows. This design provides a fast drilling rate and added cutting structure durability in medium to medium hard formations. The HSN rubber O-ring provides adequate sealing for bearing durability.
Steel tooth bits series
Soft formation tooth bits:
The soft formations tooth bits are used to drill low compressive strength, soft formations. Long projection tooth lengths are used on high offset cones to provide the greatest penetrations rates possible. Wear resistance hard facing is used to control tooth wear. On the softest bit types this hard facing completely covers the bit teeth.
Medium hard formations tooth bits:
The medium hard formation tooth bits are used to drill high compressive strength, medium hard formations. Shoot projection teeth with reduced crest length are used in this series of bit designs. Durable hard facing is applied to reduce tooth wear.
Note: For more detailed specifications or catalog, please feel free to contact us.
Send Inquiry to This Supplier
You May Also Like
-
Hardfacing Abrasion High Wear Resistant Performance Cladding Plate TubeUS$ 399.69 - 399.69MOQ: 1 Square Meter
-
Chrome Molybdenum Cast Crusher Hammer With Impact Resistance Over 200 JNegotiableMOQ: 1 Piece
-
Drilling Equipments Drilling Fluids Vacuum DegasserNegotiableMOQ: 1 Set
-
Good Quality Tungsten Carbide Button InsertsUS$ 1 - 5MOQ: 100 Pieces
-
Airless Truck Tire Solid Vehicle Tire 17.5-25 20.5-25 for Mining Machine PartsUS$ 16 - 200MOQ: 1 Piece
-
Ball Mill Plant Used Automatic Feeding Electromagnetic Vibrating FeederUS$ 650 - 800MOQ: 1 Set
-
API 16A Cameron/shaffer Type Single Ram BOP Manual for Oilfield DrillingUS$ 100000.00 - 100000.00MOQ: 1 Set
-
High QualityBearing Seat Sodium Ductile Iron Pipe Clampsductile Iron CastingUS$ 0.8 - 1.3MOQ: 1 Metric Ton
-
Silicon Bouncing Ball for Vibro SifterUS$ 0.5 - 0.8MOQ: 200 Pieces
-
Wear Resistant Jaw Crusher Toggle Plate Whatsapp008615290435825US$ 1 - 500MOQ: 100 Pieces
