Specifacations of K501
| DGPS GNSS Board K501 | |||
| Technical Specifications | Signal Tracking -GPS L1 C/A code, L1/L2 P code -BD-2 B1/B2 | ||
| Performance Specifications | Pseudo Range Accuracy -L1=10cm/L2=10cm -B1=10cm/B2=10cm | ||
| Carrier Phase Accuracy -L1=0.5mm/L2=1mm -B1=0.5mm/B2=0.5mm | |||
| Time Precision: 50ns | |||
| Standalone Positioning Accuracy: <1.5m | |||
| Static Accuracy -Horizontal: ±(2.5 +1×10-6×D)mm -Vertical: ±(5 + 1×10-6×D)mm | |||
| RTK Accuracy -Horizontal: ±(10+0.5×10-6×D)mm -Vertical: ±(20+0.5×10-6×D)mm | |||
| Timing Precision: -GPS 40ns -BD2 50ns -GPS+BD2 50ns | |||
| Measurement precision: 0.1m/s | |||
| Acceleration: 4g | |||
| Overload: 15g | |||
| RTK initialization -RTK initialization time: <10s -Reliability: > 99.9% | |||
| Signal Tracking: -Cold start: <50s -Warm start: <30s -Hot start: <15s -Signal recapture: <2s | |||
| Communications | 3 LV-TTL RS232 Ports -Baud rates up to 115,200 | ||
| Data Format: -NMEA-0183 Support (can customize) -Compass Binary self definition -CMR/CMR+ Support -RTCM2.3 Support -RTCM3.0 Support | |||
| Positioning data update rate -1 Hz, 5 Hz & 10 Hz (depends on installed option) | |||
| Raw data update rate -1 Hz, 5 Hz, 10 Hz & 20 Hz | |||
| Height: no limit | |||
| Speed: no limit | |||
| Physical Characteristics | Size: 46 mm x 71 mm x 13mm | ||
| I/O interface: 20-pin Double male header | |||
| Weight: 26g | |||
| Environmental Characteristics | Operating: -40°C to +85°C | ||
| Storage: -55°C to +95°C | |||
| Humidity: 95% no condensation | |||
| Electrical | Memory: 200MB | ||
| Input Voltage: +3.3V~+6V DC | |||
| Power consuming: 1.0 W | |||
| Radio Frequency Interface | Antenna interface: MCX | ||
| Output Power: +3.3~+6V DC | |||
| Output current: <100mA | |||
| OEM Board K501 (The World first and smallest size GPS+BeiDdou high accuracy RTK GNSS Module) 1.By using the GPS+BeiDou dual system high dynamic processing engine, the positioning accuracy could reach centi-meter 2.The hardware size, interface, data command is capable with other main board 3.K501 could be used on high accuracy land surveying (RTK or Handheld RTK), deformation monitoring system, machine control, integrated system, exploration, high precision agriculture, marine, ports, meteorological, defense, university and institute, high accuracy differential positioning and time service | |||
DGPS GNSS Board K501
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Laser Shaft Alignment Tool Heat Press Laser AlignmentNegotiableMOQ: 100 Pieces
-
ASTM D638 Plastic Tensile Tester Universal Tensile Testing Machine for Lab Use Universal Tensile Tester Load Cell OptionsUS$ 3000 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Shaft Alignment Tool SKF TKSA 31 Laser Alignment Tool Shaft AlignmentNegotiableMOQ: 100 Pieces
-
SKF TKSA 31 Basic Wired Laser Shaft Alignment ToolNegotiableMOQ: 100 Pieces
-
High Quality Shaft Alignment Tool Tksa31 With Good Price, Laser Alignment, Tksa SeriesNegotiableMOQ: 100 Pieces
-
Shaft Alignment Tool TKSA 51 Large Sized Detectors and Powerful Lasers,quickly Check and Correct Shaft Alignments,very Easy to UseNegotiableMOQ: 100 Pieces
-
SKF TKSA 31 Laser Axis Intermediate Tool Easy-to-Use Touch Screen Quick Customization OEM Support Test Instruments ProductNegotiableMOQ: 100 Pieces
-
TKSA 51 Shaft Laser Aligner Alignment Tool High Quality With Good PriceNegotiableMOQ: 100 Pieces
