Small TD Series Bucket Elevator

   Small TD Series Bucket Elevator   

Introduction of Bucket Elevator in cement industry

This conveyor machine, bucket elevator is designed and made as the standard of JB3926-85. It is widely used in metallurgy, chemical industry, building materials, mine, grain and vegetable oil, food, fodder, plastic and medicine etc.

Component of Bucket Elevator in cement industry

It consists of head section with driving pulley, elevator boot (down section) with take-up pulley, elevator casing, driving device and back stop ,braking device. there is a inspection hole on elevator casing,  to oberve all operation.

Driving device is equiped with YZ reducer and ZQ reducer. YZ axis reducer is directly coupled with pulley shaft. this design can omit driving platform with compact structure, light weight.

Also, fixed security protector on bucket elevator: belt speed detector, belt alignment device, backstop, ect. to ensure safty operation.

Feature of Bucket Elevator in cement industry

1) Low driving power, inflow feeding, induction unloading, high-volume hopper intensive arrangement. There is almost no feed back and excavating circumstance when materials are lifted, so invalid power is little.

2) Wide lifting range, little materials type and property requirement can not only lift general powder and granule materials, but also lift high polishing materials. Sound seal and little circumstance pollution.

3) Good running reliability, the advanced design principle and handling method assure reliability of whole machine running, the non-fault time exceed 20 thousand hours. Stable running make it reach higher lifting height.

4) The life is long, inflow feeding, non excavating with hopper and there is few extrusion and collision circumstance between materials. There is little materials sprinking during feeding and discharging to reduce machinery abrasion.

Technical Parameters of Bucket Elevator in cement industry