Primary Gyratory Crusher/Two Stage Crusher/Cock Crusher for Gold

Primary Gyratory Crusher/Two Stage Crusher/Cock Crusher for Gold

The Handling Materials and Description of Primary Gyratory Crusher

 This primary gyratory crusher is suitable for crushing feldspar, limestone, slag in the brick plant, construction wastes and so on, thus solving the problems of crushing high-humidity materials such as gangue and coal cinder which are often used as additive materials and fuel and for producing standard brick and air brick.

The Performance Characteristics of Primary Gyratory Crusher

1.Primary gyratory crusher is suitable for the fine crushing of crisp materials with no blockage, low powder dust pollution and low noise.

2. Primary gyratory crusher shortens the time that the materials stay in the crushing chamber, thus extending the service life of the easy-wearing parts.

3. The installation is very convenient, thus greatly improving the flexibility of the equipment.

Structure of Primary Gyratory Crusher

When primary gyratory crusher works, driven by the two electric motors, the two sets of rotors that are connected together rotate with high speed at the same time, and the materials inside the chamber are crushed first by the higher rotor and then further crushed by the lower rotor rotating with high speed, and the materials inside the inner chamber will also hit and crush with each other until the materials are crushed to powders and become coal cinder particles whose discharging granularity is smaller than 3mm and this granularity can totally satisfy the requirement of brick plant that uses the coal cinder particles as fuel for making brick.