coal gangue crusher

small stone crusher machine is the double rotor two successive broken, without screen, various wet slag can be broken, stone in the water can be broken, there is no bonding and clogging phenomenon, control the size of materials only needs to adjust the gap between the pulverizer hammer.

machine for crusher unique structural design and application widely, also known as the bottom sieve grinder, slag disintegrator, cindery disintegrator, shale crusher

machine for crusher parameter

machine for crusher application

machine for crusher is particularly useful in brick and tile factory slag, shale, coal cinder, coal gangue, construction waste and other material crushing, with gangue, coal cinder in making bricks added material, fuel and gangue, shale production standard bricks, hollow bricks of high humidity of the main equipments in the primary processing of materials. small stone crusher machine is mainly used for coal, coal gangue, slag, steel slag, limestone, coke, galena, siderite, sphalerite, limonite, etc., especially suitable for a particle size is fine, larger water content of brittle material crushing, widely used in chemical, electric power, aluminum plants, minerals, building materials, mineral processing, and other industries.

machine for crusher composition structure

machine for crusher mainly consists of a frame, a rotor, a lining plate, hammer and other parts, a driving grooved pulley, the material due to the high speed rotation of rotor hammer with material facing the broken plate impact and is broken. small stone crusher machine points into two parts: the upper body and the lower body, small stone crusher machine inner equipped with protective wear lining board, the door body internal wear and deformation, the rotor is a rotor shaft, a central disk, end disk, hammer shaft, hammer and other parts.

machine for crusher working principle

machine for crusher under the drive of the motor, the two sets of rotor are connected with each other in series also high-speed rotation, material in the inner cavity of the machine by the rotor to crush was immediately crusher by the next rotation of the rotor , lumen stock mutual rapid collision and mutual shattered, to hammer powder material, the effect of powder material, forming a particle size less than 3 mm.
Characteristics of machine for crusher

1, machine for crusher bidirectional rotation, and the through persistent shift bidirectional operation mode, then hammer and crushing toothed plate between the uniform wear and reduces the outage replacement of wearing parts of frequency. Double rotor upper and lower two grinding, crushing material more thoroughly.

2, suitable for brittle material crushing, no blockage, little dust, low noise.

3, the material in the crushing cavity to shorten the time to improve the service life of wearing parts.

4, hydraulic electric starting cabinet, safe and convenient. Convenient installation, greatly improving the degree of freedom of the equipment; quick overhauling, the mill on the side of the wicket can easy open, so that the mill maintenance and wearing parts replacement becomes faster and more convenient.

machine for crusher in wood case

 1.How can I make the order?
Contact me(call me or send an E-mail to me),we'll guide you to make the order.
2.Do you have other products?
Yes,we have mineral processing equipment series crusher,ball mill,spiral classifier,vibrating screen,trommel screen,rotary scrubber,shaking table,spiral chute,jig machine,flotation machine,mixing tank,belt conveyor etc.In addition,we also provides a complete set of mineral processing design,mineral analysis,equipment production,installation,commissioning test ,warranty etc services.
3.Other questions.
Any questions or needs,please feel free to contact me.Waiting for you!