Contact Platform Support
Help CenterBottle Water Making Machine
Related Products
-
PE/PP Bottle Blow Mouding MachineUS$ 30,000 - 60,000MOQ: 1 Set -
Blow Moulding Plastic Processing MachineryUS$ 30,000 - 50,000MOQ: 1 Set
-
Bottle Making MachineUS$ 20,000 - 40,000MOQ: 1 Set
-
Automatic PET Bottle Making PlantUS$ 45,000 - 50,000MOQ: 1 Set
-
Mineral Water Bottle Making/Blow Molding MachineNegotiableMOQ: 1 Set
Bottle Water Making Machine
BM-Aseries full-automatic pet stretch blow molding machine is the most stable two-step automatic stretch blow moulding machine. It has one to two cavities and the maximum capacity of the products is 0.6L and 1.5L. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
1).High Automatization
2).High Intelligence:The machine can be controlled through touch screen and running status is shown on it.
3).High Quanlity:Steady infrared heating system blowing and highly precise blow-mould closing system ensure quality.
4).High Speed:1400BPH(1-cavity) 3200BPH(2-cavity).
5).No Contamination:Closed production zone, good self-lubrication system avoid contamination.
6).Low Cost:Low consumption of electricity, air and water.
7).High Transparency:Easy maintenance, absolute safely, visual inspection, low noise.
Features
A. Stable performance with advanced PLC.
B. Conveying preforms automatically with conveyor.
C. Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.
D. High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.
E. High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.
F. No contamination and low noise with the air cylinder to drive the action instead of the oil pump.
G. Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.
H. Strong clamping force with high pressure and double crank links to lock the mold.
I. Two ways of operating: automatic and manual.
J. Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.
K. Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.
L. Contamination is avoided for the bottle body.
M. Ideal effect of the chilling with the chilling system.
N. Easy installation and starting
O. Low rejection rate: less than 0.2 percent.
mineral water bottle making machine
| TYPE | ITEM | BM-A2 | BM-A3 | BM-A4 | BM-A6 |
| CONTAINER | Number of cavity | 2 cavities | 3 cavities | 4 cavities | 6 cavities |
| Output | 2400-2700 pcs/hr | 3000-3300 pcs/hr | 5500-6000 pcs/hr | 7000-8000 pcs/hr | |
| ntainer volume | 0.6L | 0.6L | 0.6L | 0.6L | |
| Max.neck diameter | 38mm | 38mm | 38mm | 28-30mm | |
| ntainer diameter | 65mm | 65mm | 65mm | 60mm | |
| ntainer height | 230mm | 230mm | 230mm | 260mm | |
| ELECTRICAL SYSTEM | Number of lamp | 21pcs | 28pcs | 35pcs | 56pcs |
| Max.heating power | 21kw | 28kw | 32kw | 34kw | |
| Installation power | 24kw | 28kw | 32kw | 48kw | |
| Actual power consumption | 14kw | 18kw | 22kw | 24kw | |
| AIR SYSTEM | Operatating pressure | 7-9kg/cm² | 7-9kg/cm² | 7-9kg/cm² | 7-8kg/cm² |
| Low pressure consuming | 1000Ltr/min | 1200Ltr/min | 1600Ltr/min | 1600Ltr/min | |
| Blowing pressure | 25-35kg/cm² | 25-35kg/cm² | 25-35kg/cm² | 25-35kg/cm² | |
| High pressure consuming | 1500-2000 Ltr/min | 2000-2200 Ltr/min | 2200-2500 Ltr/min | 2000-2200 Ltr/min | |
| CHILLER WATER | Operating pressure | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² | 5-6 kg/cm² |
| Temperatuer | 10°C | 10°C | 10°C | 10°C | |
| Consuming | 5600kcal/hr | 5600kcal/hr | 5600kcal/hr | 8000kcal/hr | |
| Flow rater | 30Ltr/min | 30Ltr/min | 30Ltr/min | 88Ltr/min | |
| MACHINE | Machine dimension | 2.3x1.5x1.7(m) | 3.5x1.95x2.1(m) | 3.7x1.95x2.1(m) | 5.0x2.1x2.1(m) |
| Machine weight |
Product show
Send Inquiry to This Supplier
You May Also Like
-
Cheapest Automatic Bottle Blowing Machine Prices/factory Price Automatic Bottle Shrink Wrapping MachineUS$ 5,000 - 80,000MOQ: 1 Set
-
Hot Top Performance EPS Automatic Vacuum Block Molding MachineUS$ 1,000 - 50,000MOQ: 1 Set
-
Hot Sale Polyethylene Plastic Film Blowing Machine PriceUS$ 33,000 - 33,000MOQ: 1 Set
-
30 PET Bottle Blowing Machines for Sale +86 15136240765US$ 48,457 - 105,000MOQ: 1 Set
-
Industrial Plastic Bottle Blowing MachineUS$ 4,566 - 7,899MOQ: 1 Set
-
Machine for Blowing High Barrier Film/film Making-lineNegotiableMOQ: 1 Set
-
Automatic Mineral Water PET Bottle Blow Molding MachineUS$ 10,000 - 38,500MOQ: 1 Set
-
XK-BM01 Blow Molding Machine and MoldNegotiableMOQ: 1 Set
-
Series of DW Laser CutterUS$ 6,000 - 9,999MOQ: 1 Piece
-
Small Plastic Film Blowing Machine, Lab Blown Film Equipment, Mini Type Blown Film MachineUS$ 8000 - 11000MOQ: 1 Set
