Contact Platform Support
Help CenterBest Quality Three-way Pipe Extruding Hydraulic Press
Related Products
-
PLC Control T-pipe Extrusion Hydraulic PressUS$ 50,000 - 300,000MOQ: 1 Set -
Tee Pipe Hydraulic Forging PressUS$ 100,000 - 300,000MOQ: 1 Set
-
2016 CE ISO Certificate Pipe Tee Making MachineUS$ 10,000 - 500,000MOQ: 1 Set
-
Straight Welding Pipe Making MachineUS$ 50,000 - 400,000MOQ: 1 Set
-
2017 Steel Pipe Making MachineUS$ 50,000 - 400,000MOQ: 1 Set
Application & Feature
Manufacturing various T-pipe specifications, and gaining parts of 90 degrees or 135 degrees intersection angle as long as you alter the position between two side cylinders.
It has been made up to 4000 ton capacity with 300 MP a high-pressure unit, max. T-pipe diameter is 325,10S wall depth with carbon steel or stainless steel.
Stand-alone hydraulic and electrical system with PLC executes three operations of inch, manual and semi-automatic , featured with layout optimization, easy repair, reliable operation, high productivity and quality products.
Main Technical Data
| Technical Parameter | Unit | HJ041-63 Four-column | HJ041-100 Four-column | HJ041-200 Four-column | HJ041-315 Four-column | HJ041-630 Four-column | HJ041-630 Framed | HJ041-1000 Framed | HJ041-1500 Framed | |
| Nominal Force | KN | 630 | 1000 | 2000 | 3150 | 6300 | 6300 | 10000 | 15000 | |
| Lateral Force | KN | 250x3 | 500x2 | 1000x3 | 2000x3 | 3150x3 | 5000x2 | 8000x2 | 12500x2 | |
| Max. Working Pressure | Mpa | 25 | 25 | 25 | 25 | 25 | 25 | 25 | 25 | |
| Daylight | mm | 500 | 900 | 1120 | 1250 | 1800 | 1200 | 1500 | 1800 | |
| Ram Stroke | mm | 230 | 600 | 500 | 600 | 1000 | 500 | 800 | 800 | |
| Ejector Stroke | mm | 150 | 100 | 200 | 200 | 350 | 350 | 400 | 400 | |
| Table Height above Floor | mm | 800 | 860 | 550 | 650 | 500 | 600 | 600 | 1550 | |
| Max.Distance between L&R Piston End-faces | mm | 600 | 600 | 1000 | 1120 | 1800 | 1200 | 1400 | 2000 | |
| Max.Distance from Rear Piston End-face to Table Center | mm | 300 | 300 | 500 | 450 | 900 | / | / | / | |
| Height from Lateral Cylinder Center to Table | mm | 100 | 120 | 220 | 320 | 350 | 320 | 400 | 500 | |
| Ram Speed | Quick Descent | mm/s | 20 | 160 | 120 | 80 | 120 | 60 | 60 | 100 |
| Work | 4~6 | 10~23 | 12~24 | 10 | 6~13 | 8 | 6 | 6 | ||
| Return | 40 | 130 | 150 | 60 | 150 | 100 | 80 | 80 | ||
| Bilateral Cylinder Synchro Extruding Speed | mm/s | 17 | 10 | 14~24 | 8~16 | 6 | 3~5 | 3~6 | 3~5 | |
| Motor Power | KW | 5.5 | 11 | 15.5 | 22 | 30x2 | 59.5 | 51.5 | 143.5 | |
| Overall Size | FB | mm | 1525 | 1700 | 2200 | 2535 | 4790 | 4132 | 4250 | 2000 |
| LR | 2870 | 3000 | 4800 | 5355 | 5860 | 4856 | 6650 | 4800 | ||
| Height above Floor | 2400 | 3260 | 5015 | 4312/4127 | 5920 | 6240 | 5780 | 3520D | ||
| Bilateral or Triple-lateral Cylinder Layout | D | C | D | D | A | E | E | E | ||
1.Specifications mentioned above are subject to any change without notice.
2.The products can be tailored as customer's desire.
3.Letter A means triple-lateral cylinder layout, the left and the right side cylinders are opposite and the other at the rear side at 90º angle to each other. C represents bilateral cylinder layout, the left cylinder at 90º angle to the rear or the left cylinder at 135º angle to the rear. D indicates triple-lateral cylinder layout, the left and the right side cylinders are opposite and the other at the rear side at 90º angle to each other or 45º angle to the right. E bilateral cylinder layout, the left and the right side cylinders stand oppositely.
FAQ ABOUT HYDRAULIC PRESSES
Does welded beam easy deformation?
We treat it with tempering treatment to reduce internal stress.Besides, we also make casting beam.
What is the treating process of four column?
Columns are made of 45# hot rolling round steel,then aligning,medium frequency hardening and chroming to ensure the precision,perpendicularity and glossiness.
The oil cylinder is important part,what if it broke?
We use forging cylinder which is forged by one 45# round steel,no welded.The broke rate is almost zero.
What about the electric system?
We use PLC electric control system with less line,easy maintenance and can programmable.
If part of the machine broke,does it easier to buy it in our country?
We can use customer appointed accessories if necessary.
Do you provide after service?
We provide technical service for life.
we are manufacturer of hydraulic press more than fifty years and can manufacture non-standard hydraulic press as your need( such as large worktable,deep slider stroke,multiple cylinder,high speed,double acting...)
Send Inquiry to This Supplier
You May Also Like
-
Multifunctional Twin-cylinder Baling Press for Aluminum CansUS$ 12500MOQ: 1 Unit
-
Automatic/manual Fluidized Bed Dip Powder Coating Equipment Line for Refrigerator Shelves ProductionUS$ 2000 - 40000MOQ: 1 Set
-
Replaceable Knives Wood Chipper Moveable Type Chips Ready for Compost or BoilersNegotiableMOQ: 1 Set
-
Hydraulic Baler for CansUS$ 3000MOQ: 1 Unit
-
Multifunctional Hydraulic Baler/hydraulic Briquetting Machine Manufacturing PlantUS$ 5500MOQ: 1 Unit
-
Automatic Fluidized Bed Dip Powder Coating Equipment LineUS$ 2000 - 40000MOQ: 1 Set
-
Wood Chipper Price Tree Branches Reduce Debris by 80% With Precision BladesNegotiableMOQ: 1 Set
-
Drum Wood Chipper Manufacturer Quality Ideal for Forestry, FarmsNegotiableMOQ: 1 Set
-
Drum Wood Chipper Price Quality Low Noise, High PowerNegotiableMOQ: 1 Set
-
Drum Wood Shredder Manufacturer Auto Eco-Friendly Green EnergyNegotiableMOQ: 1 Set
