Mould Cultivation Incubator/chamber MJX
Specifications
1. Cold rolling steel case;2. Bottom heating and air blast;
3. Quick-release airduct and rack;
4. Intelligent controller.
Uses:
This equipment is widely used in environmental protection, epidemic prevention, workstock, chemical pharmaceutical, drug test, fishery and other areas of research experiment and production department. It is the specialized thermostatic equipment for water analysis, BOD test, and bacteria, moulds and microorganism cultivation and storage, as well as plant cultivation and seed-breeding test.
Characteristics of standard form incubator:
1.Stainless steel inner chamber; foursquare semicircle transition, convenient to clean; space between shelves is adjustable.
2.Micro-computer control system ensures precise and reliable temperature control; LCD enables multiple groups of data to be displayed at a time; ultraviolet germicidal lamp.
3.Independent humidification, sterilization and temperature limit system with function of over-temperature alarm and auto-power-cut-off.
4.Test hole of 52mm at left side of container.
5.Double airtight door structure.
6.Fluoride-free refrigeration.
7.Manual Temperatwre Control.
Characteristics of functional form incubator:
1. Intelligent programmed temperature and humidity control system with program of 30 to sections ensure timing, repeated or multistep running of temperature and humidity.
2. No freezing thanks to intelligent refrigeration and defrosting system.
3. Function of auto running, auto stopping and timing running, as well as parameter memorizing, power reset recovering and temperature display revising.
4. Watch timer and independent temperature safety device, which auto breaks off when over temperature limit.
5. Function of self-diagnosis,over temperature protection.
Optional accessories:
a. Printer: RMB1150 (desktop)
b. Supplementary oxygen, nitrogen interface: RMB200
c. RS485 interface and communication software interface: RMB800
Main Technical Parameters:
|
Model |
voltage (V) |
Tem. variation (°C) |
Tem.dis- tinguish- ability(°C) |
Tem. fluctua-tion (°C) |
Tem. uniformity (°C) |
Hum- idity variation (°C) |
Hum- idity error |
Heat- ing power |
Refri- gerant |
|
Standard |
MJX-70BⅢ |
220V/ 50HZ |
Humidifi |
0.1°C | High tem |
±1°C | 60-90% RH |
5-8% RH |
300W | R134a |
| MJX-150BⅢ | 500W | |||||||||
| MJX-250BⅢ | 800W | |||||||||
|
Func- tional form |
MJX-70BX | 300W | ||||||||
| MJX-150BX | 500W | |||||||||
| MJX-250BX | 800W | |||||||||
|
Model |
Interior dimensions W×D×H(mm) |
Exterior dimensions W×D×H(mm) |
Packaging dimensions W×D×H(mm) |
Gross/net weight(kg) |
Timing range | Ambient tem. (°C) |
|
Standard |
MJX-70BⅢ | 420×350×500 | 570×560×1020 | 730×720×1170 | 59.5/86 | 1-9999 min |
5-30°C |
| MJX-150BⅢ | 500×400×750 | 640×620×1270 | 820×760×1430 | 68.5/98 | |||
| MJX-250BⅢ | 500×500×950 | 660×700×1470 | 880×825×1645 | 72/116 | |||
Func |
MJX-70BX | 420×350×500 | 570×560×1020 | 730×720×1170 | 59.5/86 | ||
| MJX-150BX | 500×400×750 | 640×620×1270 | 820×760×1430 | 68.5/98 | |||
| MJX-250BX | 500×500×950 | 660×700×1470 | 880×825×1645 | 72/116 | |||
Send Inquiry to This Supplier
You May Also Like
-
1200C Vacuum Crucible Annealing Furnace for Semiconductor WaferUS$ 1000 - 10000MOQ: 1 Piece
-
TWJR-B-C-230x230mm Temperature Adjustable Laboratory Heating PlateUS$ 188.1 - 190MOQ: 1 Set
-
SELON BPH SERIES HEATING INCUBATOR (LCD)NegotiableMOQ: 2 Sets
-
Magnet Properties/primary School Acoustic Experment Box/quality Experiment BoxUS$ 80 - 200MOQ: 5 Sets
-
Magnetic StirrerUS$ 80 - 90MOQ: 10 Sets
-
Tube Furnace Type GKD-TFUS$ 1000 - 10000MOQ: 1 Set
-
DJ-4 Electrical Lab Used Magnetic Stirrer/ Cheap Magnetic StirrerUS$ 100 - 200MOQ: 1 Unit
-
Muffle Furnace/Hebi Xintianke Touch Muffle Furnace/Coal Ash DeterminationNegotiableMOQ: 1 Unit
-
PFA Microwave Digestion Vessels Jars 60ml,90ml,120mlNegotiableMOQ: 50 Pieces
-
Vacuum PumpUS$ 110 - 150MOQ: 1 Piece





