Advanced Bamboo wood kiln furnace carbonization stove for BBQ

Product overviews of bamboo wood kiln furnace carbonization stove

Product description of bamboo wood kiln furnace carbonization stove

charcoal briquette carbonization furnace is to carbonize the biomass briquette into wood charcoal.charcoal briquette carbonization furnace for biomass charcoal can greatly increased carbonizing ratio (increased from about 88% to 99%) and shortened the carbonizing time (from 24 hours to 6 hours), and shows the features of easy operation, higher safety, high efficiency, and energy saving. This furnace is ideal equipment for charcoal briquette carbonization furnace to have anoxic distillation carbonization.

 1.What’s the raw materials can be carbonized? 

such as wood logs,bamboo, wood briquettes,coconut shell, biomass waste,cashew shell, macadamia shell and so on.

 Final product of bamboo wood kiln furnace carbonization stove

Difference between Yuxiang machinery and others about bamboo wood kiln furnace carbonization stove

1. Thickness of outer stove is: wall --- 4mm, bottom --- 12mm, other supplier uses 3mm and 8mm.
2. Thickness of Inner pot is: wall --- 8mm, bottom --- 10mm, other supplier uses 4mm and 6mm.
3. The brick we used for building outer stove is good quality, high temperature resistance, white refractory bricks. Other supply uses common bricks.
4. National certified motor with copper core.
5. Container design for better loading solution.

1. What materials do you use to dry ?
You can use almost all the biomass materials.

2. What is the max moisture of your material ?
Our machine can dry biomass materials between 60% and 70%.

3. What is the temperature and carbonization rate? 

230℃ can reach 99%. .

 4. Could you offer complete briquette machine production line ?
Yes, we will allocate suitable production line, according to your special requirement, such as crusher, conveyor, dryer, briquette machine, etc.

 5. What is capacity of your machine ?
One inner pot can load 2.5tons machine-made briquettes; 8hours will get one ton machine-made charcoal.
One Inner pot can load 2tons natural wood, 8-10hours will get 600kg-800kg natural charcoal.
Therefore, one furnace can get: 3tons machine-made charcoal, 1.8-2.5tons natural wood charcoal.

6. What is carbonization time ?
Usually, 8-10hours. If your natural wood is fresh, it takes long time to remove moisture of wood;Therefore, carbonization time is longer.

7. Can we use the machine directly ?
Yes, start the machine, when temperature reach 320 degree, put your materials into hopper, you will get fuel briquette.

8. Does this machine has spare parts ?

Yes, below is some parts of this machine, please check it. When you buy our machine, we will attach 1*propeller, 1*shaping pipe , 3* welding rods, 3* Heating rings.