Contact Platform Support
Help Center[ROTEX MASTER] Roller Shell & Roll Shell & Roller & Mill Shell (for YGKJ560)
![[ROTEX MASTER] Roller Shell & Roll Shell & Roller & Mill Shell (for YGKJ560) thumbnail-1](https://img11.fr-trading.com/2/1_617_57136_750_750.jpg.webp)
![[ROTEX MASTER] Roller Shell & Roll Shell & Roller & Mill Shell (for YGKJ560) photo-1](https://img11.fr-trading.com/3/1_617_57136_750_750.jpg.webp)
Related Products
-
![[ROTEX MASTER] Pellet Die & Ring Die & Mill Die (for YGKJ680 With 2-3 Ton per Hour)](https://res.goldsupplier.com/img/env2/common/load/circle-loading.svg)
[ROTEX MASTER] Pellet Die & Ring Die & Mill Die (for YGKJ680 With 2-3 Ton per Hour)US$ 600 - 10,000MOQ: 1 Unit -
[ROTEX MASTER] 2016 Vertical Ring Die Wood Pellet Machine ,pellet Press 1-1.5T/Hour YGKJ560 With Automatic LubricationUS$ 30 - 300MOQ: 1 Unit
-
China Supplier Biomass Wood Pellet Machine Pelletizer Press MachineUS$ 25,000 - 28,500MOQ: 1 Set
-
(Manufacturer) Rice Bran Granulator Machine / Wheat Bran Pellet Making MachineUS$ 28,000 - 70,000MOQ: 1 Set
-
Rotexmaster Suitable Price and Wonderful Structure Wheat Bran Pellet MachineUS$ 28,000 - 70,000MOQ: 1 Set
[ROTEX MASTER] Ring Die Pellet Mill Roller Shell For Sale
1.Select correctly appropriate die hole compression ratio
2. Correctly adjust the working clearance between ring die and roller, from 0.1 to 0.3 suitable.(after new pellet mill being switched on, roller, driven by ring die, getting into a state of prerunning,but not rotating.)
3. New ring die should match new roller to use. Roller connecting with ring die must be loose in front and tight in back.When roller two sides appear sharp corners, it should be timely used hand grinder to blunt the flange part so as to have a good connection of roller and ring die.
4. Before raw material fed into pellet mill,precleaning and magnetic separation treatment is necessary in order to minimize iron impurities of getting into die hole. Checking regularly the die hole is also essential to see whether the die is blocked and accordingly clean the blocked die hole.
5. If plastic deformation happens to ring die guiding material cone hole,causing hole shrinking, it must be repaired. During repairing, pay attention to that ring die inner surface lowest height must be 2mm higher than the bottom of overtravel groove.In addition,the eccentric shaft adjusting must allows an extra, otherwise ring die should be scraped.
Roller Shell
Wood Pellet Production Line Cases
Processing Plant
Contact Jenny freely
Jenny
Add: Zhangqiu, jinan city, shandong province, China
TEL: +86-531-83318718
FAX: +86-531-83769999
Mobile/whatspp/viber/wechat:+86-18615687605
Skype: pelletindustry04
Email: machine04(at)
Send Inquiry to This Supplier
You May Also Like
-
China Factory Wholesale 500KW Industrial Electric Silent Power Diesel GeneratorNegotiableMOQ: 1 Set
-
Small Feed Pellet Machine Sawdust Briquette Machine Sawdust Pellet Production Equipment LineUS$ 690 - 3880MOQ: 1 Set
-
Humic Acid Fertilizer Pellet Machine(CE)US$ 880 - 99,000MOQ: 1 Set
-
Compress Wood Pellet Mill/Flat Die Wood Pellet Machine/Wood Pellet Hammer MillUS$ 4,600 - 5,000MOQ: 1 Set
-
ZLG850 Wood Pellet Making Machine/Biomass Pellet MillUS$ 500 - 10,000MOQ: 1 Set
-
Paddy Rice Husk Briquette MachineUS$ 2,000 - 3,000MOQ: 1 Set
-
Factory Direct Supply Flat Die Diesel Small Pellet PressUS$ 500 - 1,000MOQ: 1 Set
-
Industrial Complete Flat Die Wood Pellet Production LineUS$ 20,000 - 25,000MOQ: 1 Set
-
Factory Directly Wood Pellet Press, Wood Pellet Press Machine, Gemco Supply Wood Pellet MillUS$ 3,000 - 4,000MOQ: 1 Set
-
High Output and Low Consumption Wood Waste Charcoal Briquette MachineNegotiableMOQ: 1 Set
