High Quality XS Ore Washing Machine

Ore washing machine
Ore washing machine,is the large-scale equipment used for washing ore in ferrous and nonferrous metallurgy, mining, iron and steel, metallurgy, chemicals, building materials,etc. and is divided into a screw ore washer and cylinder ore washing machine.

High quality ore washing machine working principle:
Washing cylinder is supported by four tugs, the electrical machine drive the reducer,big or small gears drive washing cylinder to rotate in low speed. The aggregate including mud and limestone is fed in from the feeding port, and enter into the rotating rotary drum, in the washing drum, install certain angular wear-resisting rubber lining and rise and fall,from the feeding port and discharging port,manifold cycles,is washed by consequent and antidromic washing water,cleaned aggregate is discharged after the delivery end screen and dehydration.Waste water including sludge outflow from discharging end baffle with holes.

Ore washing machine features:
1. simple structure, the impeller drive bearing unit with water and isolated by water material greatly avoid the bearing due to flooding, sand and pollutants cause damage to the phenomenon.
2.The bucket wheel stone washing machine (sand washing machine) is used to wash the stone gravel pits when the traditional spiral stone washing machine compared with significant advantages as follows:
a. Minimal loss of fine sand and stone powder, the wash building sand gradation and fineness modulus up to the national "building sand", "building pebbles, gravel" standard.
b. machine except screen has almost no wearing parts.
c. long life, long-term without maintenance.

Ore washing machine Parameter: