Smart Card ultrasonic Winder

Specifications

Steady welding point, completely eradicate insufficient solder
Save labor and cost
Search the frequency automatically

60 KHz High Frequency Ultrasonic Welding Machines , Spot Welder For Smart Card

 

Quick Detail:

 

Steady welding point, completely eradicate insufficient solder
Save labor and cost
Search the frequency automatically

 

 

Description:

 

During the past half year, with many effort from the research development section of our company, at present we have successfully promote the intelligent card welding equipment substantially. After promotion, comparison with the former one, the properties of the equipment has been promoted highly, more stability, better in search the frequency at more wide range, and much better appearance. On the process using the former 60K equipment, with the damage of the welding horn, the frequency would be altered.(the frequency is decided by the size of the product).When the frequency is altered to a certain degree, the ultrasonic generator would be difficult to coincide with the frequency, then influencing to the normal running of all the ultrasonic system.

 

 

Applications:

 

The equipment is used for the coil embedded in a smart card.

 

 

Specifications:

 

Model	YP-D77
Frequency	60Khz or custom made
Working Mode	PLC or manual
Material of Head	Wear-resisting alloy steel, HRC≥50
Hole for line	φ0.3 mm, φ0.5 mm or custom made
Cable	2M
Generator	V1.5
Size of generator	250*250*120 mm
Size of Shell	φ25*100 mm
Material of Shell	Nylon or aluminium
Cooling mode	Compressed air(φ4 mm)

 

 

Competitive Advantage:

 

 Steady welding point, completely eradicate insufficient solder technically.

 The size of welding spots is the same, equality line, good effect on uniformity.

 The welding spot is small, wouldn’t increase the weight of the coil, easy to do lamination and encapsulation.

 To leave out the immersion tin step before doing welding, save an operator.

 After skilled in welding, much faster than the way to use searing iron to do weld.

 On the process on manufactory, there is no waste gas, waste rubbish on pollution, runs in quiet and no noise.

 To select the frequency 60KHz, one machine could drive 5-10 ultrasonic products, the speed to do welding is much faster.

 Low power consumption, to save production cost for manufactory enterprise.

 

Contact: Summer 
Skype: summer072016
Tel: 86-13600541971