Hot-dipped Galvanized Water Tank 1m*1m, 1.22m*1.22m

Hot-dipped galvanized water tank with high quality

1. Water Tank Introduction:

Connections: A comprehensive range of tank connections for site fitting.

Accessories:

a. Bolt nut & washers stainless steel 304 material.

b. Sealing material Non-toxic P.V.C foam tape shall be used in between the joints.

c. Covers the tank cover shall be constructed from 1.2mm to 3.0mm of thickness stainless steel 304 material according to the requirement.

d. Ladders and Level Indicator 

2. Water Tank  Advantages:

1) Light weight, high strength.

2) Leak-proof /Water Tightness: Due to the material is fiberglass reinforce plastic with high density, and the sealing tape is high performance with non toxic, so it's leak-proof tank;

3) Long lifetime, long durable time: the maximum distortion of the sidewall is less than 1 percent for the height; maximum distortion of the bottom center is less than 10mm. The normal durable lifetime is more than 30 years.

4) Corrosion resisting; anti-rusted

5) Easy to clean and maintenance management convenient, Drainage at the tank bottom can be cleaned easily and Manhole panel makes it easy to enter into the water tank inside.

6) Non-toxic, it is made from food grade resin, clean and no pollution. SMC Water Tanks satisfy relevant Food Sanitation standards. Since exterior light is completely blocked, bacteria generation and germ growths are prevented.

7) Convenient Installation: Standardized parts are used for on-site installation so that materials can be brought into restricted areas for convenient installation.

3. Water Tank Specification:

Water tank size: 1-1000

Board size: 0.5*0.5m, 1.0*0.5m, 1.0*1.0m, 1.22*1.22m etc

Wall board thickness: 3mm, 3.5mm, 4mm ,4.5mm, 5mm etc.

4. Water Tank Physical Properties:

 5. Water Tank Constructions:

 6. Our workshop 

If you are interested in our products, please feel free to contact us.