Multi Media Filter
Multi media filter
- work principle
DHDL---X type energy-saving multi-media filter mainly use one or several filter media , under the certain pressure the water through media removal the suspend , mechanical impurities, serve to reduce water turbidity, general requirements of water turbidity is less than 20 degrees , outlet water turbidity is below the 3degrees.
Removal of the suspended substances, solid particles. Suspended solid are water insoluble hundred colloidal solid, which precipitate, when the conditions are suitable , filter retain suspended solids , suspended solid in the filter media retention as a measure of the weight difference before or after filter function basis, according to water impurities can be filtered using single double and multi-layer filter filter, meet the requirements of deep water purification.
Filter media include: quartz sand ,anthracite coal magnetite manganese sand. diatomaceous earth activated carbon, the device has a cheap cost , low operation cost ,simple operation etc
- technology parameters
| model parameters |
DHDL-300 | DHDL-500 | DHDL-800 | DHDL-1000 | DHDL-1500 | DHDL-2000 | DHDL-2600 | DHDL-3000 |
| Filter flow | 2 | 6 | 15 | 25 | 53 | 100 | 150 | 210 |
| filter volume | 0.07 | 0.20 | 0.50 | 0.79 | 0.79 | 3.14 | 5.31 | 7.07 |
| Filter rate | 5~20 | |||||||
| Filter media diameter D(mm) | 0.5~1.0 | |||||||
| Suspend turbidity before filter | ≤20mg/L(FTU) | |||||||
| Suspend turbidity after filter | ≤3.0mg/L(FTU) | |||||||
| capacity of cut polluted | 6~10kg/m3 | |||||||
| filtration resistance loss | Initial pressure loss of about 0.02 MPa ;filter failure out of the water pressure is 0.05~0.10MPa | |||||||
| work pressure | 0.05~0.6MPa | |||||||
| Woke temperature | 5~40OEM | |||||||
| pure water pressure | 0.1MPa | |||||||
| pure water strongth | 10~12L/S.m2 | |||||||
| pure wash air pressure | 0.05~0.1MPa | |||||||
| wash air strength | 60L/S.m2 | |||||||
1.About Feedback
1) After your inquiry we will give you a quick revert within 12 hours
2) Any questions do free to let me know and my trade manager will stay on line all the time
3) The time you consult us ,the convenience will follows you.
2.Why choose us?
1) Choose us,you will find a cost-efficient way.
2) Choose us,convenience will follows you all the time .
3) After inquiry you will realize we are the one thatt you are looking for .


Send Inquiry to This Supplier
You May Also Like
-
DTC 7 1/16"-3000psi BOP for WorkoverNegotiableMOQ: 1 Set
-
Well Completion & Production EquipmentNegotiableMOQ: 1
-
API 7K Drawworks for Oilfield Drilling Rig With Best Price and Good QualityUS$ 1,000 - 5,000MOQ: 1 Set
-
5% Discount!!!API 3NB Series Mud Pump For Oil Drilling Rig ,Oil Well Drilling Triplex Mud PumpNegotiableMOQ: 1 Set
-
Flow Control Line Pipe Fittings Hammer UnionNegotiableMOQ: 1 Piece
-
NOV TDS Parts 94522-1AN Valve For Oil and Gas DrillingNegotiableMOQ: 10 Units
-
Drilling Rig Parts Manufacturers Supply Atlas D50- Final Drive From Stock. Welcome to Call to Negotiate Business!NegotiableMOQ: 1 Piece
-
295.3mm GRS537US$ 200 - 600MOQ: 1 Piece
-
Replaceable Sleeve StabilizerNegotiableMOQ: 1 Set
-
Hydraulic Disc Brake PSZ65 PSZ75 PSK75 PSK80 PSK90 PSK120 PZ30 PZ40 DrawworksUS$ 8000 - 12000MOQ: 1 Set



