Good Quality Cable Pulling Grip / Cable Socks
Application
Galvanized Steel Cable Socks For Pulling Cable is used for cable pulling in power line construction.
Characteristic
It is knitted by joint capital steel wire .
It has good softness.
It is easy to extend and contract.
Technical Data for Good Quality Cable Pulling Grip
Model | Rated load(KN) | Applicable cable diameter(mm) | Weight(Kg) | ||
WT-60 | 20 | 50-65 | 1.40 | ||
WT-80 | 20 | 70-85 | 1.55 | ||
WT-100 | 30 | 90-105 | 2.10 | ||
WT-120 | 30 | 110-125 | 2.30 | ||
Send Inquiry to This Supplier
You May Also Like
-
Outdoor/Indoor 2400-2483 MHz/2.4GHz 12dB Omnidirectional Fiberglass WIFI AntennaNegotiableMOQ: 100 Pieces
-
2.4G 802.11b/g/n 20W WIFI Signal Booster With 1000mW 2.4GHz Wifi Signal Booster 20W for 5km Outdoor WifiUS$ 5 - 40MOQ: 1 Piece
-
698-2700MHz 3x1 RF Hybrid Combiner 3 in 1 Out n Female Connector DC-3GHzNegotiableMOQ: 1 Piece
-
50 Ohm DC-3GHz 10W Dummy LoadUS$ 1 - 25MOQ: 1 Piece
-
Communication Relay Board S42024-L3237-A107US$ 10 - 2,000MOQ: 1 Piece
-
Optical SplitterUS$ 55 - 95MOQ: 100 Sets
-
UFL Base IPEX/UFL Connector for rf Cable Antenna and PCB ModuleUS$ 0.16 - 0.32MOQ: 100 Pieces
-
2400-2483MHz Wifi Fiberglass Omni 2.4ghz Dipole 9dBi AntennaNegotiableMOQ: 100 Pieces
-
Uhf & Vhf 433 MHz 5dB Omnidirectional Fiberglass Walkie Talkie AntennaNegotiableMOQ: 100 Pieces
-
Ameison 5.8GHz 5dBi High Performance Desktop Wifi Rubber Duck External Antenna for Huawei E5172NegotiableMOQ: 1000 Pieces











