Home > Products > Cold Work Mould Steel > Steel Plate 1.2379 Cold Work Mould Steel
Steel Plate 1.2379 Cold Work Mould Steel
- 1000 Ton / Tons per Month
- Shanghai
- T/T
- 30 days
Product Details
Brand Name: | CWS-Steel | Place of Origin: | China | Model Number: | cws-14 |
Type: | Steel Plate | Application: | Other, Mold &Die | Surface Treatment: | Other, Uncoated |
Technique: | Hot Rolled | Standard: | AISI, DIN, GB, JIS | Grade: | 1.2379/D2/SKD11/Cr12Mo1V1 |
Special Use: | Other, mould steel |
Product Description
1.2379 Cold Work Mould Steel
Introduction:
D2 is a high carbon - high chromium air hardening tool steel, heat treatable to 60-62 Rc. D2 offers excellent wear and abrasion resistance, due to large volumes of carbides in the microstructure. D2 is widely used in long production cold work applications requiring very high wear resistance and high compression strength. It is machinable in the annealed condition, and, like other air hardening tool steels, exhibits minimal distortion in heat treat. D2 is available in de-carb free rounds, flats, and squares, as well as ground flat stock and drill rod.
Applications include:
Typical applications for D2 tool steel are blanking, forming, and trim dies, gages, slitting cutters, wear parts, lamination dies, thread rolling dies, drawing dies, rotary cutting dies, knurls, bending dies, gages, shear blades, burnishing tools, rolls, machine parts, master parts, injection screw and tip components, seaming rolls, extrusion dies, tire shredders, scrap choppers, etc.
Forging:
Heating for forging must be done slowly and uniformly. Soak through at 1850°-1950°F and reheat as often as necessary, stopping work when the temperature drops below 1700°F. After forging, cool slowly in lime, mica, dry ashes or furnace. D2 should always be annealed after forging.
Annealing:
Heat slowly to 1550°-1600°F, hold until entire mass is heated through, and cool slowly in the furnace (40°F per hour) to about 1000°F, after which cooling rate may be increased. Suitable precautions must be taken to prevent excessive carburization or decarburization.
Stress relieving:
When desirable to relieve the strains of machining, heat slowly to 1050°-1250°F, allow to equalize, and then cool in still air (Strain Relieving).
Preheat prior to hardening:
Preheat slowly to 1350°-1450°F and hold at this temperature until material is uniformly heated.
Hardening:
After thorough preheating, heat to 1800°-1850°F. Hold the work piece at the hardening temperature until it is completely and uniformly heated.
Quenching:
D2 is an air hardening steel and will develop hardness on cooling in still air. To avoid scaling and prevent decarburization of the work piece surface, controlled atmosphere or vacuum furnaces are recommended. If these furnaces are not available, pack hardening, salt baths or wrapping the piece in stainless steel foil will provide some degree of surface protection in the hardening process. Parts should be allowed to cool to 150F, or to where they can be held in the bare hand, and then temper immediately.
Tempering:
The tempering temperature may be varied
Equivalent grades | GB | DIN | AISI | JIS | BS | ||||||||
Cr12Mo1V1 | 1.2379 | D2 | SKD11 | BD2 | |||||||||
Chemical Composition | C | Si | Mn | Cr | P | S | V | Mo | Other | ||||
1.50-1.60 | 0.10-0.40 | 0.15-0.45 | 11.50-12.50 | 0.03MAX | 0.03MAX | 0.90-1.10 | 0.60-0.80 | - | |||||
Available size | Round Bar | Diameter | Length | ||||||||||
60-800mm | 2000-6000mm | ||||||||||||
Flat Bar | Thickness | Width | Length | ||||||||||
25-400mm | 200-800mm | 2000-6000mm | |||||||||||
Surface condition | Black surface/ Grinded/ Machined | ||||||||||||
Annealed hardness | HB225MAX | ||||||||||||
Characteristics | Very high resistance against abrasive and adhesive wear due to a high volume of hard carbides in the steel matrix | ||||||||||||
Applications | Shear blades,Thread rolling dies,Drawing and bending tools | ||||||||||||
Heat treatment | Hardening | ||||||||||||
100°C | 200°C | 300°C | 400°C | 500°C | |||||||||
63 | 61 | 58 | 58 | 59 | |||||||||
Mechanical properties | Density | 7.7[g/cm3] | |||||||||||
Thermal Conductivity | 20.20 W/(m/k) | ||||||||||||
Specific heat capacity[J/g.K] | 0.46 | ||||||||||||
Coefficient of Linear Thermal Expansion 10-6 oC-1 | |||||||||||||
20-100°C | 20-200°C | 20-300°C | 20-400°C | 20-500°C |
Contact Us
- Kunshan Chengweishang Special Steel Co.,Ltd.
- Contact nameAncaus
- Phone86-512-36808358
- AddressNo, 58, Chengming Road, Yushan Area, Kunshan City, Jiangsu Province, China Suzhou,Jiangsu
Plastic Mould Steel | Hot Work Mould Steel | Cold Work Mould Steel | High Speed Steel |
Carbon Steel | Bearing Steel | Gear Steel | Spring Steel |
- Mild Structural Steel Plate A36 Q235 Q345 S275jr S235jr S355jr S355j2 Ms Carbon Steel Plate
- AS/NZS 4671standard SL62/SL72//Rl718/Rl818/ Construction Concrete Reinforcement Mesh Welded-Wire-Mesh
- P355 P355N P355NL P355GH Boiler and Presure Vessel Steel Plate
- A36 Q235 Q345 Q355 4340 4140 Hot Rolled Steel Plate
- Production of Hastelloy alloy UNS N10276 bar, forged plate (strip), wire, and pipe
- ASTM A283 A387 Hot Rolled Alloy Steel Plate
- S235 S275 S355 Mild Steel Plate
- A514 A517 A516 Q245R Q345R Container Carbon Steel Plate
- ASME SA514 Gr.q SA517 Gr.q High Strength Alloy Steel Plate
- Low Temperature Container 09mnnidr SA203 SA204 SA302 Steel Plate
- S460 S500 S690 S890 S960 Hot Rolled High Strength Structure Steel Plate
- Alloy Steel Plate Hot Rolled ASTM A387 A514 A517 Pressure Vessel Steel Plate
- P265gh P275gh P235gh Boiler and Pressure Vessel Steel Plate
- Hot Rolled 4130 4140 4340 Alloy High Strength Steel Plate
- Hot Rolled A36 S235 S275 Carbon Steel Plate
- ASTM A299 Grade B Boiler Steel Plate
- Hot Rolled SA537 Cl1 Carbon Structural Steel Plate
- A633 A302 Hot Rolled Carbon Steel Plate
- ASTM A572 Gr. 50 A588 A633 Low Alloy High Strength Steel Sheet
- Wnm360 400 450 500 Abrasion Resistant Steel Plate
- Low Alloy High Strength Steel Plate EN S355m S355ml S355n S355nl
- A203 Low Temperature Pressure Vessel Steel Plate
- ASME SA515 SA516 SA537 High Temperature Pressure Vessel Steel Plate
- 19Mn3 16Mo3 15Mo3 Boiler Steel Plate
Popular Searches
Find Similar Products By Category
- Minerals & Metallurgy > Steel > Steel Sheets
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- Services
- Latest Sourcing Requests
- Product Update
- Companies of Today
- GoldSupplier.com Mobile Site
- B2B Articles
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
Ancaus
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-