Contact Platform Support
Help Center3 Rollers Roll Form Machine
Related Products
-
3 Roller Mechanical Rolling Machine for Metal RollingUS$ 4,500 - 5,500MOQ: 1 Unit -
Mechanical Type 3 Roller Rolling MachineUS$ 4,500 - 5,500MOQ: 1 Unit
-
Hot Sale 3 Roller Metal Rolling MachineUS$ 4,500 - 5,500MOQ: 1 Unit
-
Metal Roller Rolling Machine With Mechanical Lifting SystemUS$ 4,500 - 5,500MOQ: 1 Unit
-
Mechanical Type 3 Roller Sheet Rolling MachineUS$ 4,500 - 5,500MOQ: 1 Unit
roll form machine
3 rollers roll form machine
Features:
1. The machine is composed by two main parts, there are working parts and transmission parts. Working parts include two lower rollers and one upper roller with roller bearings. The lower roller is the capstan; the upper roller is driven roller. Height of upper roller can be adjusted freely. Besides, the transmission part contains main motor, reduction box, etc.
2. The main motor drive the main reduction box, and then the main reduction box drive the lower roller. Direction of rotation of the lower roller can be controlled by the main motor.
3. Subsidiary motor drive the subsidiary reduction box, then the upper roller could perform vertical movement.
4. Unloading equipment can help operator take out finished products.
Specifications:
No. |
Parameters |
W11-4x2000 |
1 |
Bending thickness |
4mm |
2 |
Bending width |
2000mm |
3 |
Steel plate yield limit |
245Mpa |
4 |
Min. Bending diameter(full load) |
T4×B2000×Φmin400mm |
5 |
Diameter of upper roller |
Φ160mm |
6 |
Diameter of lower roller |
Φ140mm |
7 |
Distance between center of two lower roller |
260mm |
8 |
Operation speed |
8m/min |
9 |
Main motor |
4kw |
10 |
Lifting transmission |
Alloy worm gear and alloy nut |
Send Inquiry to This Supplier
You May Also Like
-
Rolling MillNegotiableMOQ: 2400 Sets
-
Work Roll for Steel Rolling Mill, Work Roll, Rolling Mill RollsUS$ 10000.00 - 10000.00MOQ: 1 Piece
-
HRM1500 Vertical Roller MillNegotiableMOQ: 1 Set
-
Tungsten Carbide Rolling MillsUS$ 300 - 600MOQ: 1 Set
-
Titanium Carbide Roller High Speed Finishing Guide Wheel for Steel Rolling MillsUS$ 13.5 - 15MOQ: 1 Kilogram
-
GT-TH203 Partial Short Circuit Annealing Machine Heater Anneal EquipmentUS$ 1 - 2000MOQ: 1 Set
-
Wall Angle Roll Forming MachineUS$ 1 - 100MOQ: 1 Set
-
Roll Dies for Making Square Steel PipeUS$ 300 - 3000MOQ: 1 Set
-
Fully Automatic C-shaped Steel Forming MachineNegotiableMOQ: 1 Set
-
Cassette Roller DiesUS$ 1 - 2MOQ: 1 Set
