Contact Platform Support
Help CenterRectangular Tube
Related Products
-
ERW Steel Pipe( Electric Resistance Welded Steel Pipe )US$ 380 - 385MOQ: 1 Ton -
3PE Coating Steel PipeUS$ 380 - 385MOQ: 1 Ton
-
C26000 Brass Rectangular Tube 15x10mm 20x15mm 30x20mm 40x30mm Decorative Structural GradeUS$ 8 - 25MOQ: 100 Kilograms
-
Aluminium Rectangular Tube 40x20mm Wall 2mm 6061 T6 Hollow Section Pipe for Trailer Chassis StructureUS$ 0.5 - 4.5MOQ: 500 Kilograms
-
Welded Square and Rectangular TubeUS$ 450 - 500MOQ: 10 Tons
Rectangular Tubes __________for any details, email to us: info@great-pipe.com
Rectangular hollow sections are not as common as UCs and UBs. This is down to the fact that it is much more difficult to bolts it to other beams or to bolt other members to it. RHSs are described by their depth, width and wall thickness. An example is a 200 x 100 x 8 RHS, which is 200 mm deep, 100 mm wide and the wall is 8 mm thick. Hot rolled RHSs are made at the mill as one piece, whereas cold formed RHSs are made of a flat sheet rolled at right angles and welded. It is therefore easy to note the difference, as the cold rolled RHSs have a weld all along its length.
|
Standard |
ASTM A500, EN 10210, EN 10219, JIS G3466, BS 1387, BS 6323 PART5 |
|
Grades |
A500, S185, S235, S235JR, S235 G2H, S275, S275JR, S355JRH, S355J2H, St37, ST52 |
|
Out diameter |
10*20mm - 600*400mm |
|
Wall thickness |
0.5mm - 20mm |
Surface Conditions Special Features
Hot Rolled Hard to find sizes
Hot Rolled Pickled and Oiled Mitre cutting
Cold Rolled High strength steel on request
KleenKote Mult lengths
Standard Corner Radius(Mechanical Sizes:)
| Diameter (inch) | Wall Thickness (inch) | Radius Tolerance (inch) |
| 1/2 to 1 1/2 |
0.028 |
1/32 to 1/16 |
| 1/2 to 2 1/2 |
0.035 |
1/32 to 1/16 |
| 1/2 to 4 |
0.049 |
3/64 to 5/64 |
| 1/2 to 4 1/8 |
0.065 |
1/16 to 7/64 |
| 3/4 to 4 1/8 |
0.083 |
5/64 to 1/8 |
| over 4 1/8 to 6 |
0.095 |
3/16 to 5/16 |
| 1 to 4 1/8 |
0.095 |
3/32 to 5/32 |
| over 4 1/8 to 6 |
0.109 |
3/16 to 5/16 |
| 1 1/4 to 4 |
0.109 |
1/8 to 13/64 |
| over 4 to 6 |
0.120 |
3/16 to 5/16 |
| 1 1/4 to 4 |
0.120 |
3/16 to 5/16 |
| over 4 to 6 |
0.134 |
7/32 to 7/16 |
| 2 to 4 |
0.148 |
3/16 to 5/16 |
| over 4 to 8 |
0.148 |
7/32 to 7/16 |
| 2 to 8 |
0.165 |
1/4 to 1/2 |
| 2 to 8 |
0.180 |
1/4 to 1/2 |
| 2 1/2 to 4 |
0.203 |
5/16 to 9/16 |
| over 4 to 8 |
0.203 |
5/16 to 9/16 |
| 2 1/2 to 8 |
0.220 |
3/8 to 5/8 |
Standard Corner Radius(Structural Sizes:)
Max. 3 x Nominal Wall Thickness
| Mechanical Sizes |
Structural Sizes |
||
| Largest Nominal Outside Dimension |
Outside Tolerance at all Sides at Corners |
Largest Nominal Outside Dimension |
Outside Tolerance at all Sides at Corners |
| 3/16 to 5/8 |
± 0.004 |
2 1/2 and under |
± 0.020 |
| over 5/8 to 1 1/8 |
± 0.005 |
over 2 1/2 to 3 1/2 |
± 0.020 |
| over 1 1/8 to 1 1/2 |
± 0.006 |
over 3 1/2 to 5 1/2 |
± 0.030 |
| over 1 1/2 to 2 |
± 0.008 |
over 5 1/2 |
± 1% |
| over 2 to 3 |
± 0.010 |
||
| over 3 to 4 |
± 0.020 |
||
| over 4 to 6 |
± 0.020 |
||
| over 6 to 8 |
± 0.025 |
||
Straightness
Mechanical Sizes: Max. 1/16" in 3 feet
Structural Sizes: Max. 1/8" x Number of feet of total length divided by 5
Wall Thickness
Mechanical & Structural Sizes: ± 10% of Nominal Wall Thickness
Squareness of Sides
Mechanical Sizes: Max: ± b = c x 0.006"
b = Tolerance for out-of-square
c = Largest external dimension across flats
Structural Sizes: Adjacent sides may deviate from 90 ° by ± 2 °
Maximum Twist (Mechanical & Structural Sizes)
| Largest Dimension, inches |
Max. Twist*, inches |
| over 1/2 to 1 1/2 |
0.050 |
| over 1 1/2 to 2 1/2 |
0.062 |
| over 2 1/2 to 4 |
0.075 |
| over 4 to 6 |
0.087 |
| over 4 to 8 |
0.100 |
Convexity & Concavity(Mechanical & Structural Sizes)
| Largest Nominal O.D., Inches |
Tolerance ± Inches |
| 2 1/2 and under |
± 0.010 |
| over 2 1/2 to 4 |
± 0.015 |
| over 4 to 8 |
± 0.025 |
Structural Tubing A 500 Requirements
| Grades | Chemical |
Physical |
||||||
| C Max. % |
Mn Max. % | P Max. % | S Max. % | Cu Max. % | Tensile strength, min. psi |
Yield strength, min. psi |
Elongation in 2 in. |
|
| B |
0.26 |
/ | 0.04 |
0.05 | 0.20 | 58,000 |
46,000 |
23 |
| C |
0.23 |
1.35 |
0.04 |
0.05 | 0.20 | 62,000 |
50,000 |
21 |
Send Inquiry to This Supplier
You May Also Like
-
50x75 Rectangular Tube Caps Rectangular Blanking Pipe CapNegotiableMOQ: 100 Pieces
-
High Quality Square Steel Tube Connectors 100mm*100mm Stainless Steel Rectangular Tubing Rectangular Hollow Steel TubeNegotiableMOQ: 1 Ton
-
Carbon Steel Q235 Rectangular Tube 40x80mm Square Tube 50x50mm Black Rectangular Iron Tube for Structural ProjectsUS$ 300 - 850MOQ: 5 Tons
-
High Quality Square Tubing Galvanized Steel Pipe Iron Rectangular Tube PriceUS$ 495 - 2450MOQ: 1 Ton
-
Steel Rectangular Tube Bending Machine Steel Tubing Strength Square Round Tube Ss Pipe SupplierUS$ 2 - 50MOQ: 1 Kilogram
-
Hot Dip Galvanized Square Steel Pipe and Tube Hollow Section Galvanized Rectangular TubeUS$ 525 - 545MOQ: 10 Metric Tons
-
Factory Square Tubing Pipe Iron Rectangular Tube Q195 Q215 Q235 Galvanized Steel Pipe for BuildingUS$ 620 - 860MOQ: 1 Ton
-
Square & Rectangular Steel Tube Supplier– EN 10210 / ASTM A500 Square & Rectangular Hollow Section Hot Finished / Cold FormedNegotiableMOQ: 1 Metric Ton
-
Fiberglass Rectangular TubingUS$ 0.1 - 15MOQ: 3000 Meters
-
CFRP Rectangular TubeUS$ 1 - 500MOQ: 500 Meters
