Contact Platform Support
Help CenterFG Cryogenic Adhesive
Related Products
FG Cryogenic Adhesive
Description
FG Cryogenic adhesive is made from mixing and heat treatment of asphalt,polymer and polymer and plasticizers.it has high bonding strength and good anti freezing property.suitable to be used as binder for foam glass and PU at low temperature.
Application
"Surfaces must be free of moisture,loose scale and rust ,dust,oil and grease.Asphaltic primers,coal tars,siliconers,alkyd or other solvent senitive or thermoplastic primers or coating should not be me acceptable primers are zinc rich,polyester and epoxy,if in doubt,always check surface for adhesion before starting work with a test block ,apply a small block and let cure for a minimum of 24 hours,block should break before adhesive peels from surface.
Blocks of insulation material should be checked for fit to the substrate surface before work started.blocks must be reshaped or cut smaller if they do not fit,especially on overhead work.
Adhesive may be applied to either or both surfaces,Application to the rougher surface generally gives the best results."
Standard Packing
Specifications: 20kg bags, 50kg pails.
Storage
Store in a cool,dry,frost-free place.Normal storage conditions in up to 25℃ should provide indefinite shelf life.
Send Inquiry to This Supplier
You May Also Like
-
Cellular Glass SupplierUS$ 1 - 100MOQ: 1 Cubic Centimeter -
Cellular Glass ManufacturerUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
PIR Poly Cyanuric Acid Ester FoamUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
High Strength Polyurethane Pipe BracketUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
SealantUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
Fire Retardant-MasticUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
The New White MasticUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
TN-1 AdhesiveUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
Foam Glass FactoryUS$ 1 - 100MOQ: 1 Cubic Centimeter
-
Foam Glass DistributorUS$ 1 - 100MOQ: 1 Cubic Centimeter
