Tongxin Brand BL Slag Filter

Tongxin Brand BL Slag Filter photo-1
US$ 100 - 100,000 MOQ: 1 Set
Key Specifications
Get Latest Price
Place of Origin:
Henan, China
Brand Name:
Tongxin
Model Number:
BL
Payment & Shipping
Payment Methods:
Port of Shipment:
Tianjin
Delivery Detail:
Delivery time depends on order quantity.
Place of Origin Henan, China
Brand Name Tongxin
Model Number BL

Specifications

BL Slag Filter
1.The structure is compact, small footprint;
2.The filtration effect is good, low-loss;

BL Slag Filter

1. Uses and characteristics:

The aircraft is the oil, chemical industry, light industry, food, medicine and other industries in the production process for an ideal solid-liquid separation filtration equipment.

2. Main specifications and parameters:
Design pressure: 0.49 Mpa maximum working pressure: 0.45 Mpa
Design temperature: 150 ° C Test pressure: 0.613 Mpa
If special requirements can be improved user requirements, the specialized production.
Vibrator parameters:
Air pressure 0.45 - 0.6 Mpa
Vibration frequency 3000 - 4500 times / min

3. How it works:
The aircraft belongs to pressure filtration equipment to filter the filtrate through the pump to be pumped into the tank into the drain pipe, and filled the role of pressure, the filtrate in the filtrate the solid impurities were retained on the filter and filter cake formed on the filtrate through the filter into the filtered fluid through the tube out of the tank, and thus obtain a clear filtrate.
With the increase of filtration time, was trapped in the filter on the increasing number of solid impurities, so that increasing the thickness of the cake, so that so that the filtration resistance increases, the tank pressure to rise, when the pressure rose to a certain values need to slag to stop irrigation until the filtrate will enter the compressed air blown into the tank through the overflow pipe, the hydraulic tank to be filtered into another filter, or other container, to pass into the steam tank dry cake, or clean filter in other ways. Close steam, open the butterfly valve, start the vibrator, so that leaves filter vibration, the vibration filter cake on the bottom of the tank down and with slag discharge port.
4. Structure Description:
BL-type filter is mainly a tank parts, lifting mechanism, vibrator, filter leaf, butterfly valve assembly, pressure display, etc. components.

5. Installation:
1. Installation process requirements, the slag filter installed on a vibrating platform, the fixed bearing tightening bolts, according to pick a good pipe flow chart.
Note: All valves shall be installed as the microscope is easy to operate in a readily observed in places.
2. The Manifold and vibration body, butterfly implementing agencies, the air intake pipe connecting well.

6. Operation and use:
1. Preparation before driving:
(1) Check the steam, compressed air pressure has to meet the requirements, ultra-low-pressure or pressure will affect the filter's work. Oil mist device by using the manual installation of oil demand.
Leading to the tank vapor pressure: 0.3 - 0.5 Mpa
Leading to the tank of compressed air pressure: 0.6 - 0.8 Mpa
Butterfly vibrating body and executive body of compressed air pressure: 0.45 - 0.6 Mpa
(2) according to flow chart requested pick a good pipeline, and check the pipe is correct.
(3) Check the filter bearing bolt is tightened.
(4) Check whether the flexibility to enhance reliable, and open the jar-cover, check whether the correct location filter installed leaf is good, whether it has been filtered inside and outside axle leaf clamp.
(5) Check the jar sealing edge sealing strip is embedded in a bath of damage.
(6) Lid recovery, evenly tighten the bolts to open soon.
(7) Check whether the vibrating object fixed bolt tightening, start vibrator, check the reliability of its work, with or without abnormal noise. If abnormal sounds, the reasons should be identified to be excluded.
(8) butterfly starts executing agency to check whether the valve opening and closing a flexible place.
Note: 1. In order to ensure the stability of the cake, usually a constant flow rate should be, it should be the first to open the valve was closed.
2. If the filter tank to be reduced to the level when the endoscopic level, it is necessary to open loop valve, close the clear liquid valve. Filter to be filtered to flow back to tank form a cycle, until the filter tank to be working liquid when the liquid level rose again, and then clean liquid injection valve to open, close the cycle of the valve.
3. Vibration slag filter maximum working pressure of 0.45 Mpa, maximum operating temperature of 150 ° C. Operation should be strictly controlled, may not exceed demand.
4. The longest continuous vibration body vibration time should not exceed 10 seconds.
5. Do not charge too full of cake, only in two adjacent filter leaves no contact between the cake, the cake can be dry and easy to unload. If the cake contact with each other but continue to pump into the zone of suspended particles to be filtrate, then the filter leaves will soon be bending deformation.
6. Filter are not allowed to return, or blowing leaves down, so that will not only inflation will filter storm or even torn from the frame. To clean filter leaves blowing down cake will not be effective. Because part of the cake off, most of the resulting short-circuit the air will not fall off the cake still left in the filter leaves.
7. In order to ensure a stable filter effects and blowing cake effect, do not interrupt flow in the filter phase-flow filtration cake, do not completely close the fluid filtration export pipeline valve. Try to avoid fluctuations in the flow through the cake.

Send Inquiry to This Supplier

* Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer, Trading Company
Year Established
2001
Factory Size
1,000-3,000 square meters
Total Employees
51 - 100 People