pillow block bearing housing UCF210

 pillow block bearing housing UCF210

Features of insert bearings
1. They have deep grooves and wide inner rings.
2. Our insert bearings are mostly made of chrome steel Gcr15 and stainless steel AISI304.
3. They are compact and have the ability to easily align when in operation.
4. These bearings have a compact design and are easy to mount and dismount.
5. We at DEMY can obtain insert bearings with the following series: UC2, UC3, UCX, UK2, UK3, UKX, SA2, SB2, HC2, HC3, SC2, SC3, CSA2, CSB2, and SER2, etc.

A pillow block, also known as a plummer block or bearing housing, is a pedestal used to provide support for a rotating shaft with the help of compatible bearings & various accessories. Housing material for a pillow block is typically made of cast iron or cast steel.

Pillow blocks are usually referred to the housings which have a bearing fitted into them & thus the user need not purchase the bearings separately. Pillow blocks are usually mounted in cleaner environments & generally are meant for lesser loads of general industry. These differ from "plummer blocks" which are bearing housings supplied without any bearings & are usually meant for higher load ratings & corrosive industrial environments. However the terms pillow-block & plummer-block are used interchangeably in certain parts of the world.

However fundamental application of both types is the same which is to primarily mount bearings safely enabling their outer ring to be stationary while allowing rotation of the inner ring. The housing is bolted to a foundation through the holes in the base. Bearing housings are either split type or unsplit type. Split type housings are usually two piece housings where the cap and base can be detached. While certain series are one single piece housings. Various seals are provided to prevent dust and other contaminants from entering the housing. Thus the housing provides a clean environment for the expensive bearings to freely rotate hence increasing their performance and duty cycle.

Bearing housings are usually made of grey cast iron. However various different grades of metals can be used to manufacture the same.

ISO 113 specifies internationally accepted dimensions for plummer blocks.

Some of world's largest manufacturing companies of pillow blocks include CLUNT 

UC202, UC305, SB203, UK205, UCT202

UC203, UC306, SB204, UK206, UCT203

UC204, UC307, SB205, UK207, UCT 204

UC205, UC308, SB206, UK208, UCT205

UC206, UC309, SB207, UK209, UCT206

UC207, UC310, SB208, UK210, UCT207

UC208, UC311, SA203, UK211, UCT208

UC209, UC312, SA204, UK212, UCT209

UC210, UC313, SA205, UK213, UCT210

UC211, UC314, SA206, UK215, UCT211

UC212, UC315, SA207, UK216, UCT212                  

UC213, UC316, SA208, UK217, UCT213

UC214, UC317, UCFL202, UK218, UCT214

UC215, UC318, UCFL203, UCFC202, UCT215

UC216, UC319, UCFL204, UCFC203, UCT216

UC217, UC320, UCFL205, UCFC204, UCT217

UC218, UCF202, UCFL206, UCFC205, UCT218

UCP202, UCF203, UCFL207, UCFC206, UCPH202

UCP203, UCF 204, UCFL208, UCFC207, UCPH203

UCP204, UCF205, UCFL209, UCFC208, UCPH204

UCP205, UCF206, UCFL210, UCFC209, UCPH205

UCP206, UCF207, UCFL211, UCFC210, UCPH206

UCP207, UCF208, UCFL212, UCFC211, UCPH207

UCP208, UC209, UCFL213, UCFC212, UCPH208

UCP209, UCF210, UCFL214, UCFC213, UCPH209

UCP210, UCF211, UCFL215, UCFC214, UCPH210

UCP211, UCF212, UCFL216, UCFC215, UCC202

UCP212, UCF213, UCFL217, UCFC216, UCC203

UCP213, UCF214, UCFL218, UCFC217, UCC204

UCP214, UCF215, UCPA203, UCFC218, UCC205

UCP215, UCF216, UCPA204, UCC211, UCC206

UCP216, UCF217, UCPA205, UCC212, UCC207

UCP217, UCF218, UCPA206, UCC213, UCC208

UCP218, UCPA209, UCPA207, UCPA210, UCC209

UCPA208, UCC210, PSD201, PSD202, PSD203

PSD204, PSD205, PSD206, PSD207, PSD208

PSD209, PSD210, PA201, PA202, PA203

PA204, PA205, PA206, PA207, PA208

PA209, PA210, PA211, PA212, PA213

PW201, PW202, PW203, PW204, PW205

PW206, PW207, PW208, PW209, PW210

SN505, SN205, SN305, SD3034, SNL511

SN506, SN206, SN306, SD3036, SNL512

SN507, SN207, SN307, SD3038, SNL513

SN508, SN208, SN308, SD3040, SNL515

SN509, SN209, SN309, SD3044, SNL516

SN510, SN210, SN310, SD3048, SNL517

SN511, SN211, SN311, SD3052, SNL518

SN512, SN212, SN312, SD3056, SNL519

SN513, SN213, SN313, SD3060, SNL520

SN514, SN214, SN314, SD3064, SNL522

SN515, SN215, SN315, SD3068, SNL524

SN516, SN216, SN316, SD3072, SNL526

SN517, SN217, SN317, SD3076, SNL528

SN518, SN218, SN318, SSN3024, SNL530

SN519, SN219, SN319, SSN3026, SNL530

SN520, SN220, SN320, SSN3130, SNL532

SN522, SN222, SN322, SNL505, SNL605

SN524, SN224, SN324, SNL506, SNL606

SN526, SN226, SN326, SNL507, SNL607

SN528, SN228, SN328, SNL508, SNL608

SN530, SN230, SN330, SNL509, SNL609

SN532, SN232, SN332, SNL510, SNL610

SNL611, SNL619, SNL632, SNL3076, SNL2326

SNL612, SNL620, SNL3138, SNL3080, SNL2328

SNL613, SNL622, SNL3140, SNL3180 L, SNL2330

SNL615, SNL624, SNL3144, SNL230/530L, SNL2332

SNL616, SNL626, SNL3052, SNL230/500F, SNL2334

SNL617, SNL628, SNL2252, SNL230/500L, SNL3134

SNL618, SNL630, SNL3072, SNL40/530GL, SAF1057