Home > Products > other product machine > Industrial waste wire stripping machine/copper wire cable peeling machine price
Industrial waste wire stripping machine/copper wire cable peeling machine price
- 1000 Set / Sets per Month
- qingdao
- T/T L/C D/P D/A Credit Card PayPal
Product Details
Place of Origin: | Henan, China | Brand Name: | shuangying | Model Number: | SYDL-40 |
Usage: | Stripping |
Product Description
Model | Weight | Dimension | Voltage | Power | Output | Diameter |
SYDL-40 | 89kg | 55*52*84cm | 220v/380v | 2.2kw-3kw | 200-1000kg | 1.5-40mm |
SYDL-90 | 215kg | 84*78*120cm | 220v/380v | 3kw | 200-3000kg | 5-90mm |
Operation details:
1, start the motor, check whether running normal, feed check each file outsourcing, the size of the rubber and plastic cable diameter by root feed in turn.
2, long durability, in order to make the blade feeding rubber and plastic cable joint should be cut off, so as to avoid the blade gap collapse edge.
3, if the feed after deep and broken wires occurred, pay attention to the following conditions:
(1), the feeding should be adjusted, the blade on both sides of the shaft above the M12 screw pressure tightness;
(2), to check whether the position is put wrong when feed;
(3), Blade is the new change, not to be too sharp edge, application of special oil stone a little nap, moderate so far.
4, if the incoming material, rubber and plastic has been opened, but copper wire can't spit out. There are mainly four points:
(1), the shaft knurled too deep, application of special oil stone grinding on the shaft, but cannot too much grinding, too much grinding cause oily cable is difficult to drive;
(2), the spring pressure is too loose, it should be pressure tight, can spit the check;
(3), smaller diameter of wire or the axial clearance of up and down, the more the two axial clearance should be set to 0. 4-0. 6 mm
(4), the processing of rubber and plastic cable has fever, copper wire can't spit out
5, if, after feeding pressure transmission cable transmission in the past, can not be expected to stay in the middle, the case has the following several ways:
(1), check the gear belt for relaxation phenomenon;
(2), check the pressure profile on both sides of the spring pressure is too tight, no jacking force, should relax the pressure;
(3), cable oily is too much, makes the axial sliding, often should dry two axis, (when, if the machine is in operation, please pay attention to safety).
Contact Us
- Jiaozuo Double Eagle Machinery Co., Ltd.
- Contact namewendy chen
- Phone86-00-13782614163
- AddressNo.28, Shanyang Road, Shanyang District Jiaozuo,Henan
- Fine Copper Wire Drawing Machine with Annealing
- 1246 Automatic Wire and Cable Coiling and Packing Machine
- 1250 Cable Coiling Machine
- 630 Electric Wire and Cable Coiling Machine
- 90 Power Cable Making Machine
- 70 Cable Extrusion Machine
- 40H Copper Wire Annealing and Tinning Machine
- 16 Wires Multi Wire Drawing Machine with Annealing
- High Speed 8mm Copper Rod Breakdown Machine with Annealing
- 450/13 Copper Rod Drawing Machine with Annealing
- Intermediate Wire Drawing Machine with Annealing
- High Speed Super Copper Fine Wire Drawing Machine
- Automatic Scrap Cable Wire Stripper Waste Copper Wire Stripping Machine
- automatic scrap cable wire peeler wire stripping machine for sale
- Wire Stripper Cable Stripping Machine Recycling Copper Cable Stripper
- Automatic Scrap Cable Wire Stripper Waste Copper Peeler Wire Stripping Machine
- Automatic Scrap Cable Wire Stripper Peeler Waste Copper Wire Stripping Machine
- adjustable cable reel stand /10 tons cable drum stand/wire Reel Stand
- Good price and high quality wire cable adjustable reel stands with hydraulic jacks drum jack
- Large dried wooden drum /Wooden Cable Spools /cable reel
- empty large wooden cable spools / cable drum/cable reel for sale
- Medium voltage XLPE insulated high tension steel wire armoured cable
- Air condition radiator aluminium and copper wire stripper machine
- Hot sale electric wire peeling machine wire stripper machine
Popular Searches
Recommended Products
- SR489-P5-HI-A20-E Protective relay Has a variety of input and output modes
- PPD113-B03-23-111615 Inverter processor The reliability of the system is improved
- PPD113B03-26-100110 Input module Powerful processing power
- 5SHY3545L0009 Power semiconductor device System reliability
- IS215UCVGM06A IS215UCVGH1A Single-socket CPU module Multiple extension or remote substrates
- PFTL201C 10KN 3BSE007913R0010 Tension sensor Able to capture more comprehensively
- 1785-V40L processor The instructions for transmitting data are programmed
- KEBA IP706 Robot controller Supports a variety of different communication protocols and standards
- 5SHY3545L0010/3BHB013088R0001 Power module Able to convert alternating current to direct current
- 5SHY3545L0010/3BHB013088R0001 Power module Able to convert alternating current to direct current
- 6ES5948-3UR23 Central processing unit Redundant module
- 20DC460NOENNBNBNE rectifier A simple flat-wave loop is adopted without inductance
Find Similar Products By Category
- Electrical Equipment & Supplies > Wires, Cables & Cable Assemblies > Cable Manufacturing Equipment
- Buy on GoldSupplier.com
- How to Buy
- Browse by Catagories
- Browse by Hot Regoins
- Private Sourcing Events
- Sell on GoldSupplier.com
- How to Sell
- Post Products
- Manage Products
- Manage Groups
- About
- About Us
- Link to Us
- Contact Us
- Sitemap
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now-
wendy chen
Welcome to my shop! Glad to serve you!Please send your question!
Your message has exceeded the limit.
Your message has exceeded the limit.
-
-
Your inquiry content must be between 20 to 5000 characters.Send Now.
-
Please input the mailbox.
-