Protein Skimmer

Protein Skimmer Instructions

(Inside The Filtration Tank)

Installation Procedure:

1. Please connect pump to the unions of skimmer, do not forget install O-rings.(picture 1)

Note: Do not tighten the coupling too much to avoid troubles of washing and dismounting pump.

Picture 1                                       Picture2

2. Connect the getter device to the water inlet and put on pipe.( picture 1)

3. Assemble the air intake silencer on skimmer with screw. Then put on pipe so that it can connect getter device and air intake silencer. The pipe should be connected to the tubule on the bottom of air intake silencer ( picture 2)

4. Place skimmer in tank, make sure pump is completely submersed in water.

5. Turn on the power, adjust the water level to ideal position with water level adjustable switch. It is necessary to adjust water level properly when you use it first time.

6.After adjusting the water level , please screw the fixed screw to make sure the water level stable.

Note: 1.Only for saltwater use.

     2. Clean pump three times each month according to pump instructions. 

     3. Clean collection cup frequently.