Plastic 3hp submersible sewage cutter pump

Plastic 3hp submersible sewage cutter pump       

Products overview

The series pump the pump impeller with the unique structure and the new type of mechanical seal, can effectively deliver a solid content and long fiber. the impeller compared with the traditional impeller, the impeller by a single port or double port form, it is similar to a cross section of the same size bend pipe, have very good flow sex, match with reasonable volute chamber, make the pump has the high efficiency, impeller, static and dynamic balance test after, in operation of pump is stable and reliable.

This series of pumps water conservancy advanced performance, high efficient structure diversity, installation diversity, simplify the pump station, save investment.

Working conditions

1. Medium temperature not over 60°C, severe 1.0~1.3kg/d m³, PH value 5~9.

2. No inner privately owned circulation system pump and motor over liquid surface not more than 1/3.

3. Usually, the pump must be used within the scope of head in use, and ensuring the motor not load, and if need use in the head range , please declared when you place the order, so convenient for manufacturing.

4. During operation of the pump motor current may not exceed point motor rated current.

The main purpose

The series of pumps main used for municipal engineering, building construction, industrial pollution, the environmental protection sewage treatment, mines sewage treatment, and other occasions, drain the wastewater and the rain containing solids and long fiber sewage.

Products characteristics

1. With large flow anti-clogging parts, greatly improve the through ability of dirt, can effectively through 3 times of pump caliber fiber material and the solid particles that diameter about 30%of pump caliber .

2. Reasonable design, motor is reasonable, high efficiency, energy saving effect is remarkable.

3. Mechanical seal with double way series seal, and the material of the corrosion resistance for hard tungsten carbide, has the durable, wear-resisting, etc, can make the pump security service above 8000 hours continuously.

4. Pump structure tight, small volume, convenient to move, easy installation, not need built pump room, into the water can work, greatly reduce the cost for the project.

5. The oil chamber of the pump has a water probe, when water pump side mechanical seal after damage, the water enter oil chamber, probe happen signal, enforce the protection to the pump.

6. Based on user needs equipped with full automatic protection safety control cabinet, monitoring the pump's leaking, leakage, overload and over temperature , guarantee the pump running reliable safety.

7. Double guide rail automatic coupling installation system, to pump installation, maintenance brought great convenience, people will not be obliged to get in and out of the drainage hole.

8. Float switch can according to the need water level of the exact change, automatic control pump stop rev. Without a special person to care about.

9. According to applicable occasions the motor can use the type of water circulation cooling system, can guarantee the pumps in anhydrous state installation operation.

10. Installation methods have fixed automatic coupling installation and mobile free installation, can meet the use of different occasions.

 Products images