ESUN Moldable Medical Splint Orthopedic Splint

Definition:

The low temperature thermoplastic sheet, which is a new environmental friendly polymer material, is made of a special synthetic polymer polyester (such as PCL) through a series of physical and chemical processing methods.

Usage:

It can be soft in the water when the temperature reaches 65~70℃ ,then removes it from the water after soften and dries on, when its temperature drops to about 40℃ , it can be directly molding on patient’s body, the whole process is easy to operate.

Advantage:

    The low temperature thermoplastic sheet( orthopedic splint), which is non-toxic, odourless, no stimulation to the skin and fully biodegradable, is an idealmaterial of immobilization.

Product Features                                                                                         

    1.Easy to mold. It can be shaped arbitarily after softening.

    2.Reusable. Once set, it may be marked for patient identification with a felt tip or tape.

Profile may be altered or modified by heating with hot water and then remold.

    3.High strength .It can completely meet the needs of the external fixation of fracture.

    4.Light and breathable. It is made of high-end material, which is very light .The material

with meshes has the advantages of good ventilation and comfortable wear.

   5.High radiation transmittance .X-ray can through it freely, so do not need to take it off

when taking an X-ray, meanwhile ,it is convenient to observe the fracture healing.

   6.Easy to clean .Like other materials ,a long time to wear will probably cause health

problems. The low temperature thermoplastic sheet can be cleaned at room temperature,

which ensures the fixed parts clean.

   7.Environmentally safe .Non-toxic , biodegradable material poses no environmental

hazards , it will automatically degrading.

Application Range                                                                                        

   Wildly used in orthopedic company and many departments of hospital, such as

rehabilitation division ,radiotherapy  room , orthopedics, burns surgery , emergency room department of neurology .Having a good effect on fracture fixation ,functional training and orthopedic.

Product specification                                                                                                          

    Size(Length & Width):920mm*610mm, 460mm*610mm.

    Thickness:1.6mm, 2.4mm , 3.2mm 

    The mesh ratio:0%,1%,5%,12%.