Polyacrylamide APAM,CPAM,NPAM Non-ionic flocculant for waste water

Specifications

1.Manufacturer
2.Free Samples are Available
3.kinds of PAM on stock
4.Certification: ISO9001:2008
5.Experience: 8 years.

Product Description:

Anionic polyacrylamide series products are water-soluble linearity high polymers.  It is almost insoluble in benzene, aether, lipin and acetone and other common organic solvent and soluble easily in water. With flocculability, thickening, shear performance, resistance-diminishing performance and dispersivity, it is widely used in oil extraction, mineral separation, coal washing, metallurgy, chemical industry, papermaking, spinning, sugar manufacturing, medicine, environmental protection, building materials and agriculture industries.

 

Polyacrylamide according to different uses and users of the product performance requirements can choose to use different molecular weight.

 

Main application:

1.For industrial wastewater treatment, especially for suspended particles, coarse, high concentration, particles with a positive charge, water, PH value is neutral or alkaline waste water, such as iron and steel plants, electroplating plants and waste water, waste metallurgical, coal washing waste water such as sewage treatment works well.

 

2.Drinking water treatment. Of many water plants and mineral water from the river sediment will be high, more turbid, was going through the sedimentation process, but still below standard, adding flocculant force needed to make the water clean in a lot of water plant using inorganic flocculant, but the dosage is one-fiftieth of inorganic flocculants, inorganic flocculants but the effect is several times or more, sometimes with the use of better and PAC.

 

3.Used as a starch factory and the loss of starch and alcohol plant recovery tank. Now a lot of starch factory wastewater is high in starch content, emissions after the impact on the environment, waste of resources, adding PAM, so that starch deposition, sediment filter press into a cake by the filter can be used for feed, ethanol plant a lot of wine tank is processed using this technology, Heilongjiang one of Asia's largest ethanol plant is to use PAM as flocculant, on the wine tank for recycling, and has made great economic benefits.

 

4.For oilfield water plugging agent profile, three used oil displacement agent.

 

5.Used as paper additives, PAM and widely used in the paper can be used as dispersant long fiber paper, wet and dry enhancer, retention, filter aid and the flocculent papermaking wastewater.

My Skype: frank99886600

Cautions1. Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons

2. It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.

 

Main Technical Indexes:

 

 

 

 

 

Packaging and Storage:

 

Packaging: 25kg paper and plastic compound bag. With inner plastic bags for pasting model of the brown paper bag, Or according to users’ requirement;

 

Storage: The product should be stored in a cool and ventilate place. Its shelf life is 2 years

 

How to choose PAM?  

1.Anionic PAM is suitable for higher density, inorganic suspension substance with positive charge and PH value is neutral of basic solution with thick suspension particles 1mm-10mm.  

2. Cationic PAM is suitable for suspension solution with negative charge and containing organic substance.     

3. Nonionic PAM is suitable for separating mixed organic and inorganic suspension; the solution is neutral or acid.

 

When you are using Poly(acrylamide), please be cautious about it as the following:

 

1. Avoid contact with skin;

 

2. Avoid contact with eyes;

 

3. In case of accident or if you feel unwell, seek medical advice immediately (show label where possible);

 

4. Wear suitable protective clothing, gloves and eye/face protection;

 

5. Do not breathe gas/fumes/vapor/spray (appropriate wording to be specified by the manufacturer);

 

6. Avoid exposure - obtain special instruction before use;

 

Why Chose us? Just trust us!! Why?

 

1. We are one of the biggest manufacturers in China, The Top Ten in China

 

2. Advanced technology and facilities, good quality control, different grades for different applications fields.

 

3. OEM service to lots of big international companies. Gold supplier of well- know enterprises such as Petro china, Sinopec, Conoco

 

4. More than 8 years experience in different industries.

 

5. More than 10 engineers for product research and after-sale service.

6. More than 150 thousand tons production per one year.

 

Research and Development:

workshop :

warehouse :