Contact Platform Support
Help CenterSharp Design Wet Milling With High Efficiency Supplied by Manufacture
Related Products
-
1200mm Gold Grinding Wet Pan MillUS$ 5,000 - 6,000MOQ: 1 Set -
Henan China Gold Mining Grinding Machine ManufacturerUS$ 5,000 - 6,000MOQ: 1 Set
-
Grinding Mill Gold Roller Pan Mill Machinery Factory PriceUS$ 5,000 - 6,000MOQ: 1 Set
-
Dongxing Machinery Lowest Price Wet Mill for Gold Ore PlantUS$ 5,000 - 6,000MOQ: 1 Set
-
Dongxing Machinery Hot Sell in Sudan and Ghana Wet Pan Grinding Machine for GlodUS$ 5,000 - 6,000MOQ: 1 Set
Specifications
wet milling1. High efficiency and large capacity;
2.Good quality and reasonable price.
3.ISO9001-2008
1. About wet pan mill
The wet pan mill is a new mill, small investment, high yield, the production cost is low, good benefits.
2. which model is suitable?
The wet pan mill is named by the diameter of roller. Φ1300,Φ 1350,Φ 1400,Φ 1500,Φ 1600 is suitable for selection of iron ore, molybdenum ore ,lead ore ,zinc ore, antimony ore and so on. Φ 850, Φ 900, Φ 1000,Φ 1100,Φ 1200 is suitable for selection of gold ore.
3. Wet Pan Mill using scope
Mainly used with gold, silver, lead, zinc, iron, molybdenum, copper, antimony mine.
Model |
Specification |
Input size(mm) |
Rotate Speed (r/min) |
Powder(kw) |
Weight(t) |
1600A |
1600×400×200×500±20mm |
<30mm |
20-22 |
25KW |
14.5 |
1500A |
1500×350×200×460±20mm |
20-22 |
22KW |
13.5 |
|
1500B |
1500×350×150×460±20mm |
20-22 |
22KW |
12.3 |
|
1500C |
1500×300×150×420±20mm |
20-22 |
22KW |
11.3 |
|
1400A |
1400×250×150×350±20mm |
16-18 |
18.5kw |
8.5 |
|
1400B |
1400×250×150×350±20mm |
21-23 |
18.5kw |
8.5 |
|
1350A |
1350×250×150×350±20mm |
16-18 |
18.5kw |
8 |
|
1350B |
1350×250×150×350±20mm |
21-23 |
18.5kw |
8 |
|
1300A |
1300×250×150×350±20mm |
16-18 |
15kw |
7.5 |
|
1300B |
1300×250×150×350±20mm |
21-23 |
15kw |
7.5 |
|
1200A |
1200×200×80×250±20mm |
17-19 |
7.5kw |
5.5 |
|
1200B |
1200×200×80×250±20mm |
23-25 |
7.5kw |
5.5 |
|
1100A |
1100×200×80×250±20mm |
17-19 |
7.5kw |
5 |
|
1100B |
1100×200×80×250±20mm |
23-25 |
7.5kw |
5 |
|
1000 |
1000×200×80×250±20mm |
13-15 |
5.5kw |
4.5 |
Wet Pan Machine Use and Maintenance:
ü The normal operation of the mill, before they start feeding.
ü This machine prohibit strip start, the outage at boot time, you must first clean up the residual ore in the middle of the milled slot and then start.
ü Should be uniform feeding not erratic, it is best to use the feeder Part.
ü Bearing frequent butter, gear box or car rear axle with frequent checks whether the loss of gear oil.
ü Regular checks of the various parts of the screw is loose.
ü Found bearing damage must be promptly replaced, shaft eccentric avoid damage to other parts
ü Mill runtime to pay attention to that the reducer or bearing part of the presence or absence of abnormal sound, whether the temperature is too high, the motor current is too large irregularities; should be shut down immediately if the above phenomenon, exclude.
ü Machine maintenance, to ensure safety, you must remove the motor belt.
Send Inquiry to This Supplier
You May Also Like
-
Raymond Grinding Mill Roller Mill Grinder Machine Stone Ore Grinding Milling Machine For Gypsum Quartz Powder ProcessingNegotiableMOQ: 1 Set
-
Large Output HCM HLMX Superfine Vertical Mill 16t/h for 800 mesh Calcium Carbonate Filler PowderNegotiableMOQ: 1 Combo
-
Mining MillNegotiableMOQ: 2500 Sets
-
Ball Mill With VFD Speed Adjustment for Ore VariabilityUS$ 2000MOQ: 1 Combo
-
Ball Mill Jar With Capacity of 0.56-130TPH and ISO9001:2008 CertificateNegotiableMOQ: 1 Set
-
Mineral Gold Ore Copper Ore Complete Chrome Ore Processing Line for AlbaniaUS$ 10,000 - 1,000,000MOQ: 1 Set
-
Wet Pan Mill for Sudan Gold Mining Plant, Wet Pan Grinding Mill for SaleUS$ 3,000 - 15,000MOQ: 1 Set
-
Professional Coal Grinding MachineUS$ 1,900 - 3,500MOQ: 1 Piece
-
KMJ02-05 Stone Grinding Ball MachineNegotiableMOQ: 1 Unit
-
Zirconia Ball Mill Grinding MediaUS$ 5,000 - 60,000MOQ: 1 Set
